Potions tolerate SSE

Under the influence of potions, your tolerance will gradually increase, thereby reducing the effectiveness of subsequent potions. After all alchemical effects wear off, tolerances will gradually return to normal.

Compatibility | My Mods | Development Checklist

Original MOD

by lofgren

This mod increases the PC's chemical resistance. Under the influence of the potion, tolerance increases by 1% per second, and the effect of future potions decreases by 1% per second. When a health, magic, or stamina restoration potion is consumed, tolerance will instantly increase by 20%.

When all alchemical effects are cleared from the system, the PC's tolerance will slowly return to baseline (1% per second).

The result is that potion timing becomes an important consideration for the PC.

This mod uses the largely unused actor value AlchemyPowerMod. This cast value is intended for use with Fortify Alchemy's potions, which are not included in the final game. However, its effects remain, so brewing a potion while tolerance increases will result in a less effective potion that will not resume its normal effects even after tolerance returns to baseline. Therefore, it is recommended that you do not flush the potion until tolerance returns to normal. I can prevent this effect, but it will negatively affect compatibility with other mods.

If you use SkyUI, there is an MCM that allows you to adjust the amount of recovery potion increase tolerance. If using a mod that adds duration to these effects, you may want to set this number to 0.

To uninstall, use MCM or follow these steps:

• Wait until the tolerance returns to normal.
• Open the console and enter the following to obtain the permission ID: help tolerance
• Type the following command to remove the permission: Player.RemovePerk XXXXXXXX Replace XXXXXXXX with the number of permissions you obtained from the first command. Then delete the file.

lofgren publicly allows porting of Potion Tolerance

——————————————————————————————————————————————————

Compatibility | My Mods | Development List

ORIGINAL MOD

by lofgren

This mod adds chemical tolerance to the PC. While under the effect of potions, tolerance will increase by 1% each second and the effectiveness of future potions will decrease by 1% each second. When consuming a restore health, magicka, or stamina potion, tolerance will immediately increase by 20%.

When all alchemy effects have been purged from the system, the PC's tolerance will slowly return to baseline (by 1% per second).

The result is that the timing of potions becomes a serious consideration for the PC.

This mod makes use of the largely unused actor value AlchemyPowerMod. This actor value was intended to be used for potions of Fortify Alchemy, which were not included in the final game. However, its effect still remains, so brewing potions while tolerance is increased will result in a less effective potion that will not regain its normal effectiveness even after tolerance returns to baseline. Therefore it is recommended that you do not brew potions unless tolerance has returned to normal. I could prevent this effect but it would have a negative impact on compatibility with other mods.

If you use SkyUI, there is an MCM that will allow you to adjust the amount that restore potions increase tolerance. If you use a mod that adds a duration to these effects, you may wish to set this number to 0.

To uninstall, use the MCM or follow these steps:

• Wait until your tolerance returns to normal.
• Open the console and get the ID of the perk by typing: help tolerance
• Remove the perk by typing: Player.RemovePerk XXXXXXXX replacing XXXXXXXX with the number of the perk you got from the first command. Then delete the files.

lofgren for open permission to port Potion Tolerance