藥水容忍SSE

在魔藥的作用下，你的耐受力會逐漸增加，從而降低後續魔藥的效果。 在所有鍊金術效果消失後，容差將逐漸恢復正常。

兼容性|我的Mods |發展清單

原始MOD

由lofgren

該mod增加了PC的化學耐受性。在藥水的作用下，耐受性每秒增加1％，未來藥水的效果每秒減少1％。當消耗恢復健康，魔法或耐力藥水時，耐受性將立即增加20％。

當所有鍊金術效果從系統中清除後，PC的耐受性將慢慢恢復到基線（每秒1％）。

結果是魔藥的時間成爲PC的重要考慮因素。

此mod使用很大程度上未使用的actor值AlchemyPowerMod。此演員價值旨在用於Fortify Alchemy的魔藥，這些魔法未包含在最終遊戲中。然而，它的效果仍然存在，因此在耐受性增加的同時釀造藥水將導致效果較差的藥水即使在耐受性恢復到基線後也不會恢復其正常效果。因此，除非耐受性恢復正常，否則建議您不要衝洗藥水。我可以防止這種影響，但它會對與其他mod的兼容性產生負面影響。

如果您使用SkyUI，則有一個MCM可以讓您調整恢復藥水增加容差的量。如果使用爲這些效果添加持續時間的mod，您可能希望將此數字設置爲0。

要卸載，請使用MCM或按照以下步驟操作：

1.等到容差恢復正常。

2.打開控制台，輸入以下內容獲取權限ID：help tolerance

3.鍵入以下命令刪除該權限：Player.RemovePerk XXXXXXXX將XXXXXXXX替換爲您從第一個命令獲得的權限數。然後刪除文件。

lofgren公開允許移植Potion Tolerance

——————————————————————————————————————————————————

Compatibility | My Mods | Development List

ORIGINAL MOD

by lofgren

This mod adds chemical tolerance to the PC. While under the effect of potions, tolerance will increase by 1% each second and the effectiveness of future potions will decrease by 1% each second. When consuming a restore health, magicka, or stamina potion, tolerance will immediately increase by 20%.

When all alchemy effects have been purged from the system, the PC's tolerance will slowly return to baseline (by 1% per second).

The result is that the timing of potions becomes a serious consideration for the PC.

This mod makes use of the largely unused actor value AlchemyPowerMod. This actor value was intended to be used for potions of Fortify Alchemy, which were not included in the final game. However, its effect still remains, so brewing potions while tolerance is increased will result in a less effective potion that will not regain its normal effectiveness even after tolerance returns to baseline. Therefore it is recommended that you do not brew potions unless tolerance has returned to normal. I could prevent this effect but it would have a negative impact on compatibility with other mods.

If you use SkyUI, there is an MCM that will allow you to adjust the amount that restore potions increase tolerance. If you use a mod that adds a duration to these effects, you may wish to set this number to 0.

To uninstall, use the MCM or follow these steps:

• Wait until your tolerance returns to normal.
• Open the console and get the ID of the perk by typing: help tolerance
• Remove the perk by typing: Player.RemovePerk XXXXXXXX replacing XXXXXXXX with the number of the perk you got from the first command. Then delete the files.

lofgren for open permission to port Potion Tolerance