SwimSpeed
Adjust your swim speed in real-time. Configurable
模組介紹 作者原文
SwimSpeed
Author: YouDied
Discord:
Overview
SwimSpeed lets you adjust your Valheim swim speed on the fly with the Left and Right arrow keys, with full config file control over min/max range and step size. Includes Ludicrous Speed mode for when you really need to get somewhere fast.
Controls
| Key | Action |
|-----|--------|
| → Right Arrow | Increase swim speed |
| ← Left Arrow | Decrease swim speed |
A heads-up message in the top-left corner confirms every change.
Configuration
Config file: BepInEx/config/youdied.swimspeed.cfg
[Speed Range]
| Setting | Default | Range | Description |
|---------|---------|-------|-------------|
| MinimumMultiplier | 1.0 | 1.0 – 10.0 | Lowest speed the arrow keys can reach |
| MaximumMultiplier | 5.0 | 1.0 – 10.0 | Highest speed the arrow keys can reach |
| AdjustmentPercent | 20 | 1 – 100 | How much each key press changes speed (% of base) |
[Current Speed]
| Setting | Default | Description |
|---------|---------|-------------|
| CurrentMultiplier | 1.0 | Your current multiplier — saved automatically, or set directly |
[Ludicrous Speed]
| Setting | Default | Range | Description |
|---------|---------|-------|-------------|
| LudicrousEnabled | false | true/false | Whether Ludicrous Speed is active on load |
| LudicrousMultiplier | 10.0 | 2.0 – 20.0 | Bonus multiplier stacked on top of normal speed when active. Try 4–5 first! |
Tips
- Set MaximumMultiplier up to 10.0 for extreme speeds
- AdjustmentPercent = 10 gives finer control; 50 gives big jumps
- Ludicrous Speed stacks on top of your current multiplier — so 3x speed + Ludicrous x10 = 30x total. Start with LudicrousMultiplier = 4 or 5 if 10 is too chaotic
- Jumping out of water onto rocks and ladders works normally
Installation
r2modman (Recommended)
Install directly through r2modman or the mod manager.
Manual
- Install BepInExPack for Valheim
- Drop SwimSpeed.dll into /BepInEx/plugins/
Changelog
1.2.1
- Removed L key shortcut for Ludicrous Speed (conflicts with vanilla keybinds)
- Ludicrous Speed is now toggled exclusively via the config file
1.2.0
- Added config options: MinimumMultiplier, MaximumMultiplier, AdjustmentPercent
- Added Ludicrous Speed mode (L key toggle, configurable bonus multiplier)
- Current speed now persisted in config across sessions
1.1.0
- Fixed: unable to jump onto rocks/ladders from water
1.0.0
- Initial release
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。
下面這些內容需要先安裝,否則該模組不會生效: