SteelhammerSmartHotbar
Mouse wheel hotbar switching that automatically gives the wheel back to Valheim while building, allowing normal piece rotation.
模組介紹 作者原文
Steelhammer Smart Hotbar
A lightweight client-side Valheim mod that lets you switch through hotbar slots 1-8 with the mouse wheel without breaking Valheim's building controls.
Features
- Scroll the mouse wheel to switch between hotbar slots 1-8.
- Automatically stops hotbar scrolling while building.
- The mouse wheel remains available for normal building-piece rotation.
- Hold Left Ctrl to leave the mouse wheel available for Valheim's normal camera zoom.
- Optional wrap-around between slot 1 and slot 8.
- Configurable scroll direction.
- Configurable scroll delay.
- Client-side only.
- No server installation required.
- Other players do not need the mod.
Why?
Normal mouse-wheel hotbar mods can interfere with Valheim's building system because the same wheel is used to rotate building pieces.
Steelhammer Smart Hotbar detects the building context and automatically leaves the mouse wheel to Valheim whenever it is needed for construction.
Default configuration
General
Enabled = true
Enables or disables the mod.
Hotbar
InvertScrollDirection = false
Reverses the hotbar scroll direction.
WrapAround = true
Scrolling past slot 8 returns to slot 1 and vice versa.
ScrollDelay = 0.10
Minimum time between hotbar changes.
Building
DisableWhileBuilding = true
Prevents the mod from using the mouse wheel while building so pieces can be rotated normally.
Controls
ZoomModifier = LeftControl
Holding Left Ctrl leaves the mouse wheel available for Valheim's normal camera zoom.
Installation
Install with r2modman Mod Manager.
For manual installation, place:
SteelhammerSmartHotbar.dll
inside:
BepInEx/plugins/SteelhammerSmartHotbar/
Multiplayer
This mod is client-side only.
It does not need to be installed on a dedicated server and other players do not need it.
Tested
Initial release tested successfully with Valheim 1.0 and BepInExPack Valheim 5.4.2350.
AI-assisted development
Development and code review were performed with AI assistance. The mod was compiled and manually tested in Valheim before release.
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時，主機與所有用戶端需要安裝一致的模組。
下面這些內容需要先安裝，否則該模組不會生效：