SealantTool

版本 v0.3.1·更新於 2026-10-11

Water seal building pieces with the Sealer so rain no longer wears them down. Sealed floors, stairs and corewood act as roofs.

截圖 共 5 張

模組介紹 作者原文

Sealant Tool

This mod provides an alternative solution to prevent rain weathering by providing the capability to waterproof tiles with a sealant.

Basis

I always found it annoying that in order to avoid degraded wood you had to find a way to place specific roof tiles over objects.

Often I wanted to use wooden floors as unroofed balconies or stairs as windows but the constant need to repair the tiles below was frustrating.

However, Valheim's brutalist philosophy is an appealing part of the gameplay and as such, a 'lore accurate' way to solve the problem was important.

The solution is a water sealant combined with a sealant tool, inspired by the [historical viking approach][massprodtar], utilizing a [pine tar sealant][roskildesealant] for [waterproofing their ships][roskildesealant].

It also fits nicely into the swamp's tier in the progression where you really get to learn the pain of rain.

[roskildesealant]:

[massprodtar]:

The items

| | Item | What it does |

|:--|:--|:--|

| | Water Sealant | Makes a building piece waterproof. Ferment a Water Sealant Base (4 Resin + 2 Guck, at the Mead Ketill) and one base becomes 6 sealant. |

| | Sealer | The tool. Craft it at a forge (level 2) from 2 Wood and 1 Iron. |

Use

  • Make Water Sealant Base at the Mead Ketill from 4 Resin + 2 Guck, then ferment it: one base becomes 6 Water Sealant.
  • Craft the Sealer at a forge (level 2): 2 Wood, 1 Iron.
  • Equip the Sealer, open its menu (right-click) and pick Water Seal or Strip.
  • Aim at a building piece and use the Sealer.
  • Water Seal stops rain and water damage on the piece. It uses one Water Sealant.
  • Sealed floors, stairs and corewood also count as roofs for whatever is below them.
  • Strip removes a piece's sealant. The sealant is not refunded.
  • While the Sealer is equipped, unsealed pieces that are viable for sealing glow grey, while the water sealed pieces glow cyan.
  • Sealed pieces count for shelter

Two shelters in the swamp rain, at 20x speed. The roof of the right one is water sealed.

Only player-built Hammer pieces that take rain damage can be sealed.

A piece holds one sealant at a time. Sealing follows the same rules as repairing: the piece's crafting station must be in range, and wards apply.

Multiplayer

Every player and the server need the mod. The server checks every seal against the world save.

Configuration

BepInEx/config/SealantTool.cfg. The list of pieces that act as roofs is set by the server.

The highlight colors are per player.

Install and Requirements

  • BepInExPack_Valheim
  • Jötunn

Use a mod manager (r2modman, Gale or Mod Manager). It installs BepInEx and Jotunn for you.

AI Disclosure

This mod was made in part by utilizing Anthropic's Claude Opus 5.5.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

ValheimModding-Jotunndenikson-BepInExPack_Valheim

檔案與校驗

檔案名稱
SealantTool-0.3.1.zip
檔案大小
61.6 KiB