SakeysSpawnThatconfigforNIGHTspawn

版本 v1.0.2·更新於 2026-09-10

A Spawn That config file that disables nighttime spawns such as Seekers. Changes for Valheim 1.0.

模組介紹 作者原文

Sakey's Spawn that config for NIGHT Spawn

English

I REALLY Hate Seekers...!

I'm totally fine with skeletons and shamans spawning. They're not a big deal at all, and I can handle them easily.

However, if flying mobs with that kind of damage output, like Seekers, start appearing all the way inside my carefully built main base, that's seriously not okay.

Please, for the love of Odin, leave me alone.

This is a Spawn That config file designed to disable high-damage nighttime spawns from the mid-game onward.

・Nighttime Fuling spawns outside the Plains after defeating Yagluth

・Nighttime Seeker, Seeker Soldier, and Tick spawns outside the Mistlands after defeating the Queen

・Nighttime Charred Soldier spawns outside the Ashlands after defeating Fader

These are the spawns that this config disables.

This is specifically intended to disable the post-Goblin nighttime spawns, which can cause significant damage to buildings, so nighttime spawns after defeating the bosses of the Swamp and Black Forest biomes are not included.

Deep North Fimbulvinter-related spawns are also not included.

Changes

・Updated the spawn IDs that had changed due to the Valheim 1.0 update.

・Added the nighttime spawns across all biomes after defeating the Deep North boss to the disabled settings.

【Installation】

・First, install "SpawnThat", launch the game, enter a world, leave it running for just a few seconds, and then exit.

・Go to steamapp/common/Valheim/BepInEx/config* and copy the file "spawn_that.world_spawners_advanced.cfg" from the extracted ZIP folder into it.

・You will receive a warning that a file with the same name already exists, so select "Replace the file."

【Notes / Additional Information】

※SpawnThat works by specifying the spawn ID assigned to each monster and overriding the game's own settings through the config, so changing the contents of this file may cause the settings to stop working!

※The monsters that normally spawn in their native biomes and the versions that begin spawning across all biomes at night after defeating a boss have separate spawn IDs internally, so they are treated as separate spawn entries even when they are the same monster. Therefore, installing this config will not remove Seekers spawning in the Mistlands, Charred Soldiers spawning in the Ashlands, or other monsters spawning within their native biomes.

(It is possible to completely disable those as well... but that requires a separate configuration.)*

日本語

シーカーが嫌すぎる…!

骸骨やシャーマンが湧くぐらいはまだ全然許せるし餘裕。

だけど、シーカーのようなあんな火力で飛行するモブが作り込んだメインの基地にまで現れたらシャレにならない。

ガチで勘弁して欲しい。

Spawn thatで中盤以降の火力が高めの夜間湧きを潰すためのコンフィグファイルです。

・ヤグルス討伐後のフーリングの平地以外での夜間湧き

・クイーン討伐後のミストランド以外でのシーカー、シーカーの兵士、ティックの夜間湧き

・Fader討伐後の黒焦げ兵士のアッシュランド以外での夜間湧き

以上の湧き潰しです。

あくまで建築物への損傷が大きいゴブリン以降の湧き潰しなので、沼バイオームとフォレストのボス討伐後の湧きは含めていません。

またDeepNorthのFimbulvinter関連のスポーンは含めていません。

変更點

・Valheim 1.0 アプデに伴ってスポーンIDが変更されていたので更新しました。

・DeepNorthのボス討伐後の全バイオームの夜間湧きも無効設定に追加しました。

【導入方法】

・まずは「SpawnThat」を導入しゲームを起動、ワールドに入り數秒間だけ起動して終了します。

・steamapp/common/Valheim/BepInEx/configに、ZIPファイル解凍したフォルダ內にあるファイル「spawn\_that.world\_spawners\_advanced.cfg」をコピーして貼り付けてください。

・同じ名前のファイルがあるという警告が出るので「ファイルを置き換える」を選択。

【注意・補足】

※SpawnThatは各モンスターごとに割り振られたスポーンIDを指定しconfigで設定を自ら上書きする仕組みのMODですので、ファイル內容を変更すると無効になる危険があります!

※通常バイオームに湧いているものと、ボス討伐後に夜間に全バイオームにスポーンするようになる分は、ゲーム內部のスポーンIDが別々に設定されており、同一モンスターでも別枠です。なのでこのコンフィグを入れてもミストランドでスポーンするシーカー、あるいはアッシュランドでスポーンする黒焦げの兵士など帰屬バイオームでスポーンする分のモンスターが消えることはありません。

(そちらも含めて完全に消すことも可能ではありますが…その場合は別設定が必要です)*

\--------------------------------------------------------------------------------------

Sakey's SpawnThat Config for NIGHT Spawns

I hate Seekers so much…!

To all builders out there:

Are you struggling with Seekers spawning at night after defeating The Queen?

(For me, the first time I heard that thing's voice in the Meadows… I honestly got chills…)

Skeletons or Shamans spawning? That's totally fine. I can deal with that.

But when flying enemies like Seekers, with that ridiculous damage output, start appearing inside a car

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

denikson-BepInExPack_ValheimASharpPen-Spawn_That

檔案與校驗

檔案名稱
SakeysSpawnThatconfigforNIGHTspawn-1.0.2.zip
檔案大小
87.9 KiB