Very Silly Modpack

版本 v2.0.1·更新於 2025-02-24

a very silly modpack made for very silly people!!

模組介紹 作者原文

please do not use the app. if you want a mod manager use r2modman or gale.

a very silly modpack made for very silly people!!

if you are NOT silly ENOUGH for this MODPACK;;;

LEAVE NOW!!!!!

YOU ARE NOT SILLY ENOUGH AND

WILL

EXPLODE UPON CONTACT OF THIS MODPACK!!

oh but seriously this is js a modpack for a friend who is modding for the first time, a bunch of shitpost mods and a handfull of useful ones they can use later on. there are a total of 22 mods.

hey linux users! read this!

as are some other mods/modpacks on linux, this modpack requires a liiitle bit of extra setup to get fully functional.

follow these steps after installing:

if using r2modman:

  • open a terminal and type cd ~/.config/r2modmanPlus-local/ULTRAKILL/profiles/Very_Silly_Modpack/BepInEx/plugins/DomerDev-Microsoft_SAM_Inner_Monologue/
  • then type cp samlines.resource ~/.steam/steam/steamapps/common/ULTRAKILL/ULTRAKILL_Data/

OR

  • open a file manager of choice and go to ~/.config/r2modmanPlus-local/ULTRAKILL/profiles/Very_Silly_Modpack/BepInEx/plugins/DomerDev-Microsoft_SAM_Inner_Monologue/
  • copy the file samlines.resource to ~/.steam/steam/steamapps/common/ULTRAKILL/ULTRAKILL_Data/

if manually installing:

  • open a terminal and type ~/.steam/steam/steamapps/common/ULTRAKILL/BepInEx/plugins/DomerDev-Microsoft_SAM_Inner_Monologue/
  • then type cp samlines.resource ~/.steam/steam/steamapps/common/ULTRAKILL/ULTRAKILL_Data/

OR

  • open a file manager of choice and go to ~/.steam/steam/steamapps/common/ULTRAKILL/BepInEx/plugins/DomerDev-Microsoft_SAM_Inner_Monologue/
  • copy the file samlines.resource to ~/.steam/steam/steamapps/common/ULTRAKILL/ULTRAKILL_Data/

and then you should be all good! just make sure to be running w/ proton 9.0-4

the full list of mods:

  • BepInExPack (BepInEx-BepInExPack-5.4.2100)
  • UltraFumos (UltraFumosTeam-UltraFumos-1.2.1)
  • IntroSkip (The0x539-IntroSkip-4.1.1)
  • WesV2 (Kyryh-WesV2-1.2.1)
  • V2_Plastic_Chair (Crash-V2_Plastic_Chair-2.0.2)
  • PluginConfigurator (EternalsTeam-PluginConfigurator-1.10.0)
  • Configgy (Hydraxous-Configgy-1.0.4)
  • Kasane_Project (lionvilds-Kasane_Project-1.0.3)
  • USTManager (ZedDev-USTManager-1.5.4)
  • HatsuneMachine (doomahreal-HatsuneMachine-1.0.0)
  • Jaket (xzxADIxzx-Jaket-1.3.42)
  • Microsoft_SAM_Inner_Monologue (DomerDev-Microsoft_SAM_Inner_Monologue-1.0.2)
  • CybergrindDeathcam (Flazhik-CybergrindDeathcam-1.0.4)
  • Paint (bananastudio-Paint-1.0.0)
  • UltraSplash (doomahreal-UltraSplash-1.0.0)
  • BuddyHollyForCerbJumpscare (ImNotSimon-BuddyHollyForCerbJumpscare-1.1.0)
  • CybergrindMusicExplorer (Flazhik-CybergrindMusicExplorer-1.6.3)
  • AngryLevelLoader (EternalsTeam-AngryLevelLoader-2.10.1)
  • StyleToasts (The0x539-StyleToasts-0.0.1)
  • Forrbidenparry (doomahreal-Forrbidenparry-3.0.0)
  • LetsGoGambling (doomahreal-LetsGoGambling-1.0.0)
  • SomethingArc (NotABot-SomethingArc-1.0.0)
  • There is no 23rd mod. I lied.

~~"website_url":~~

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPackUltraFumosTeam-UltraFumosThe0x539-IntroSkipKyryh-WesV2Crash-V2_Plastic_ChairEternalsTeam-PluginConfiguratorHydraxous-ConfiggyxzxADIxzx-Jaket

檔案與校驗

檔案名稱
Very_Silly_Modpack-2.0.1.zip
檔案大小
114.3 KiB