Windhelm消失的物體故障修復

當您在Windhelm的拐角處行走時，有一些物體突然從視線中消失，從而破壞了您的沉浸感。 這個mod修復了他們。

小故障是什麼，此mod的作用是：

當您經過溫德海姆·史密斯鐵匠附近的道路的某個角落時，您會發現（塔洛斯神廟的）屋頂突然自行拆除，最終從您的視野中消失。

發生這種情況的原因是，Windhelm鐵匠上的平面標記可能會比實際建築物大，而該標記可能會在您靠近此建築物時取消渲染Windhelm鐵匠後面的對象。

此mod通過稍微減小Windhelm鐵匠上的平面標記的大小來修復此故障，使其更合適。

還有另一種。當您在國王宮殿面前時，溫德赫姆城門右上角的烏鴉形雕像也會遇到同樣的問題。這是由於Candlehearth Hall的平面標記錯誤。所以我也解決了。

要求：

建議使用最新版本的Skyrim SE（1.5.97+）。但從理論上講，它適用於任何包含1.5.80的版本。

免費腳本。

無需SKSE。

性能問題：

從理論上講，是的。但這實際上只有不到0.1 fps的差異。

因爲此mod表示：在Windhelm中，您渲染的對象比原始環境多。

這些額外的渲染是此mod的重點，而香草Skyrim應該做到的。

兼容性：

與幾乎所有mod兼容。

與SMIM兼容。

與Retexture Mods兼容。

與不改變香草建築原始位置的城市大修模組兼容

-更具體地說，是溫德海姆·布萊克斯特姆（Windhelm Blacksmtih）和燭燭廳（Candlehearth Hall）。

與JK的Skyrim / JK的Windhelm兼容。

*開放城市天際-不需要我的Mod

它移走了屋頂，雕像變得很好。

*在Creation Kit中，屋頂仍然存在，但在遊戲過程中它從未出現在任何位置，好像它從未存在過一樣。

這是OCS應該自己管理的。

*開放城市天際+ JK的Skyrim / Windhelm及其自己的開放城市天際兼容補丁不需要我的mod。

屋頂和雕像都很好。

• JK的Skyrim / JK的Windhelm本身無法解決故障。

注意事項：

*如果一個mod編輯了與我編輯過的完全相同的平面標記（FormID 00038321 / 00078A19），那麼它將與此mod衝突。

但是我懷疑有人會這樣做，除非他自己發現了這個故障並打算用自己的方式解決。

某些旨在重新設計整個城市結構的大型城市大修或Windhelm大修可能會做到這一點，但我不確定。

如果此Mod無法解決故障，並且您認爲是由於Mod衝突引起的，

那麼您會看到可疑mod的開/關狀態的哪種組合將自行修復故障。

*讓我知道在Skyrim中是否還有其他類似的消失故障，那麼我也可以爲它們進行修復。

*但是，如果它們是從其他mod或控制台作弊衍生而來的，我可能無法修復。

例如-JK的Skyrim在Windhelm的一個走廊中添加了槍管，當您在該走廊的拐角處時，它們會消失。

我實際上爲此桶製作了一個補丁，但是，您知道，這已經不是香草Windhelm了，因此即使找到了其他補丁，我也可能不會添加其他補丁。

如果需要，您可以使用Creation Kit自己完成。找出哪種平面標記可以控制未渲染並根據您的喜好調整其大小並不那麼複雜，或者如果您知道您的PC可以處理它，只需刪除它。

————————————————————————————

What is the glitch and What this mod does:

When you pass through a certain corner of the road near Windhelm Blacksmith, you'll find that this roof(of Temple of Talos) suddenly dismantles itself and eventually disappears from your view.

This happens because the plane marker on Windhelm Blacksmith, which is supposed to un-render the objects behind Windhelm Blacksmith when you are near this building, is wrongly big compared to the actual building.

This mod fixes this glitch by slightly reducing the size of the plane marker on Windhelm Blacksmith, making it fit better.

And there is another one. The raven-shaped statue of the right top side of Windhelm City Gate also experiences the same problem when you are in front of the Palace of the Kings. It was due to a wrongly big plane marker on Candlehearth Hall. So I also fixed it.

Requirements:

Up-to-date version of Skyrim SE(1.5.97+) recommended. But theoretically it works with any version including 1.5.80.

Script Free.

No need for SKSE.

Performance Issue:

Theoretically, YES. But it will be literally just less than 0.1 fps difference.

Because this mod says: In Windhelm, you render a few objects more than the vanilla environment.

And those additional renderings are the whole point of this mod, which vanilla Skyrim should have done.

Compatibility:

Compatible with almost all mods.

Compatible with SMIM.

Compatible with Retexture Mods.

Compatible with City Overhaul Mods that do not change the original positions of vanilla buildings

• more specifically, Windhelm Blacksmtih and Candlehearth Hall.

Compatible with JK's Skyrim / JK's Windhelm.

*Open Cities Skyrim - DOES NOT NEED my mod

It removed the roof and the statue rendered fine.

*In Creation Kit, the roof was still there but it did not appear at any position during the game as if it never existed.

This is what OCS should manage by itself.

*Open Cities Skyrim + JK's Skyrim/Windhelm with its own Open Cities Skyrim Compatible Patch DOES NOT NEED my mod.

The roof and the statue rendered fine.

*JK's Skyrim/JK's Windhelm itself does not fix the glitch.

Notices:

*If a mod edits the exact same Plane Marker that I have edited(FormID 00038321/00078A19), then it conflicts with this mod.

But I doubt anyone will ever want to do that except for the case that he found this glitch for himself and intended to fix it in his way.

Some large Cities Overhaul, or Windhelm Overhaul that aims to redesign the entire urban structure may do that, but I'm not sure.

If this mod doesn't fix the glitches and you think it's because of the mod conflict,

then you ca …