水的邊緣修復

修復了在有霧的天氣中可能導致水邊緣變得非常塊狀的視覺故障。

很長一段時間以來，我一直想知道是什麼原因導致水有時顯得“前衛”。晴朗的天氣永遠不會造成任何問題，但是一旦天氣轉爲暴風雨/有霧，水就一團糟。在某個時候，我意識到它與Skyrim的天氣系統有關。更精確地說，霧確定水陸過渡是否平穩。

當我對SSEEdit進行試驗時，我發現FNAM-霧距是決定因素。這是我爲實現平滑過渡所做的更改：

• Day Far和Night Far設置爲至少50000。

2.功率和最大值保持一致的0.85。

我還添加了針對其他世界空間天氣的那些調整，這些調整通常不由天氣模塊進行編輯-因此，例如，在Blackreach中不再有苛刻的水（這總是讓我發瘋）。

權衡

但是，請務必注意，這些調整確實會帶來一些主要副作用，這可能需要進行一些權衡：

1.所有大霧天氣的霧度基本降低了一半。對於某些人來說，這可能是一個好處，而對於另一些人來說，這可能是一個主要缺點，因此，我提供了一些區別的屏幕快照，以幫助您確定是否值得將霧氣換成光滑的水。

2.水下時，您的視力會更清晰。

要求

爲了獲得顯示的結果，必須安裝可對香草水進行返工的模塊。可悲的是，沒有解決方法，香草水的透明性是如此糟糕，以至於該修復程序甚至無法使用。兼容性部分中列出了一些不錯的選擇，儘管此選項已經用“現實水2”進行了廣泛測試，並且可以很好地工作。

如果您想自己測試一下，只需打開控制台並在水邊旁邊鍵入“ fw 10a7a7”（或任何其他有霧/暴風雨天氣），一次加載mod並進行水返工，一次不加載它。應該有明顯的區別。如果不是，則可能是您使用的水返工不完全兼容。

兼容性

現實的水之二：高度兼容。

Ilinalta-現實水

純淨水：大部分兼容。

暴風雨中的閃電：兼容。

所有主要的聲音模塊，例如《天際之聲》和《音頻大修：兼容》。

溼冷：不兼容。但是，這裏有一個適用於Wet＆Cold的小型獨立補丁程序。它可以與所有天氣組合一起使用，沒有任何問題。 **請注意，此補丁僅適用於溼冷。如果您還單獨使用True Storms，則需要下載此插件的True Storms版本。

黑暗之夜：不兼容。 Darker Nights對天氣記錄進行了廣泛的編輯，這些記錄將覆蓋此處所做的所有更改而沒有補丁。

**注意：如果您已加載True Storms以及任何其他天氣Mod和/或Wet＆Cold，則這不是您應該使用的版本。如下所述，大多數True Storms + weather mod組合都有單獨的water's edge fix版本，因此請務必使用它們以獲得最佳穩定性。

其他選擇

amorphis88提供了另一個潛在的修復程序，該修復程序採用了另一種方法來修復該錯誤，稱爲“平滑海岸”。我們的模組之間沒有衝突，因此，如果您想同時嘗試兩者，可以將它們一起使用。

對於那些希望將True Storms與重大天氣大修合併的人來說，還有幾種獨立的水邊版本。請記住，如果您打算使用以下設置之一，則不需要此版本的修復程序：

生動的天氣+ TrueStorms

NAT + TrueStorms

白雲石+ TrueStorms

神話時代+ TrueStorms

鄉村天氣+ TrueStorms

黑曜石天氣+ TrueStorms

ELFX天氣+ TrueStorms

Aequinoctium天氣+ TrueStorms

——————————————————————————————————————

For a long time I was wondering what caused the water to appear "edgy" sometimes. Clear weathers never caused any issues, but as soon as the weather turned into something stormy/foggy, the water became a mess. At some point I realised it's connected with the weather system of Skyrim. To be more precise, the fog determines wether or not the water-land transition is smooth or not.

While I experimented with SSEEdit, I found out that the FNAM - Fog Distance is the deciding factor. Here are the changes I made to achieve the smooth transitions:

• Day Far and Night Far set to at least 50000.
• Power and Max values to a consistent 0.85.

I also added those tweaks for other worldspace weathers, which are not edited by weather mods usually - so no more harsh water in Blackreach for example (which always drove me crazy).

A Trade Off

It is important to note, however, that these tweaks do come with a few major side effects that might require a bit of a trade off:

• The fogginess of all foggy weathers is basically reduced by half. This might be a bonus for some and a major drawback for others, so I've provided a few screenshots of the differences to help you decide if it's worth trading fogginess for smooth water.
• Your vision will be much clearer while underwater.

Requirements

To achieve the shown results it's mandatory that you install a mod that reworks the vanilla water. Sadly, there is no workaround for this, the transparency of the vanilla water is so terrible that this fix won't even work with it. A few great options are listed below in the compatibility section, although this has been tested extensively with Realistic Water Two and works perfectly with it.

If you would like to test it for yourself simply open the console and type "fw 10a7a7" (or any other foggy/stormy weather) while next to a body of water, one time with the mod loaded + a water rework and one time without it. There should be a noticeable difference. If not, it could be that the water rework you are using is not fully compatible.

Compatibility

Realistic Water Two: highly compatible.

Ilinalta - Realistic Water: mostly compatible.

Pure Waters: mostly compatible.

Lightning during Storms: compatible.

All major sound mods, like Sounds of Skyrim and Audio Overhaul: compatible.

Wet & Cold: Incompatible. However, there is a small standalone patch for Wet&Cold on its own available here. It can be used alongside all weather combos without any issues. **Please do note that t …