的SkyrimCustom.ini

我花了無數個小時研究最好的.ini設置，所以你沒必要！ 這是一個優化的SkyrimCustom.ini，從頭開始創建並基於許多來源的研究。

這是從頭開始編寫的優化SkyrimCustom.ini文件。這是一整天花在閱讀Skyrim配置.ini的各種指南，一週的完善以及上持續的同行評審期間的結果。我使用的指南本身就是幾週研究的結果。我將鏈接到本文底部的這些指南。大多數指南都是專門爲Oldrim編寫的;我個別加權了他們的每個建議和考慮因素，並在必要時修改它們以使用SkyrimSE。總的來說，我查看了1500多個不同的變量。如果我對進行任何更改，我將在上更新此文件。

如何啓用

將SkyrimCustom.ini複製到Documents \ My Games \ Skyrim Special Edition \。

將“iNumHWThreads”更改爲等於計算機上的邏輯CPU核心數。如果您不確定，4可能是一個安全的值。

在SkyrimPrefs.ini的'[Launcher]'標題下添加'bEnableFileSelection = 1'（此設置在SkyrimCustom.ini中不起作用。）（SkyrimPrefs.ini應該與SkyrimCustom.ini放在同一個文件夾中。）。

注意事項

SkyrimCustom.ini中定義的任何變量都會覆蓋Skyrim.ini和SkyrimPrefs.ini中的任何相同變量。這意味着在安裝此文件時，遊戲可能會忽略您使用的任何.ini更改，例如Mod Organizer 2或Wrye Bash。

該mod使用STEP項目推薦的居中十字準線。如果你喜歡你的十字準線像香草一樣偏向右邊，那麼搜索並刪除“;十字線位置”下方的線條

請注意，這是一個“超”預設。但是，作爲一般規則，我嘗試不包含任何可以在遊戲中更改的設置，因此如果您在設置窗口中將圖形設置爲“超”以外的其他設置，您仍然可以在某種程度上減少圖形，以換取更高的性能。如果你想要擠出一些額外的性能，你也可以嘗試減少某些值（iShadowMapResolution，iWaterReflectHeight，iWaterReflectWidth是一些低調的果實，但還有很多其他的。）並禁用某些變量（任何標記爲“;對於ENB來說，“這是一個顯而易見的懸而未決的成果，但還有很多其他的成果。”

特徵

修復了所有損壞的設置（指南＃1,2和3）

啓用所有性能設置（指南＃1,2和3）

沒有更多的塊狀陰影！ （指南＃5）

太陽平穩而持續地移動 - 你永遠不會注意到太陽再次移動！ （自產自銷）

修正了馬背和腳上的攝像頭位置（指南＃1）

改進的世界地圖（指南＃1）

更大，更易於閱讀的書籍和筆記（指南＃8）

更好的箭頭/螺栓拱形（指南＃1和9）

減少分散注意力的殺毒人員（Homegrown）

改善HUD位置（指南＃1）

與遊戲內設置兼容

與ENB的兼容性（指南＃1）

描述設置塊的註釋（Homegrown）

部分標題按字母順序排列！ （自產自銷）

無數的圖形增強功能（指南＃1,2,3,4,5,7）

無數其他的事情

“;注意”註釋，讓您知道需要用戶操作的位置

參考

————————————————————————————————————————————————————

This is an optimized SkyrimCustom.ini file written from scratch. It is the result of an entire day spent reading through various guides for Skyrim's configuration.ini's, a week of refinement, and an ongoing period of peer-review here. The guides I used are themselves the result of weeks of research. I will link to these guides at the bottom of this text. Most of the guides were written specifically for Oldrim; I have individually weighted each of their recommendations and considerations, and modified them where necessary to work with SkyrimSE. In total, I looked at over 1500 different variables. I will update this file here if I make any more changes to it.

How to enable

Copy SkyrimCustom.ini to Documents\My Games\Skyrim Special Edition\.

Change 'iNumHWThreads' to equal the number of logical CPU cores you have on your computer. If you aren't sure, 4 is probably a safe value.

Add 'bEnableFileSelection=1' under the '[Launcher]' header of SkyrimPrefs.ini (This setting does not work in SkyrimCustom.ini.) (SkyrimPrefs.ini should be in the same folder that you put SkyrimCustom.ini in.).

Caveats

Any variable defined in SkyrimCustom.ini overrides any identical variable in Skyrim.ini and SkyrimPrefs.ini. This means that any.ini changes you make with, eg, Mod Organizer 2 or Wrye Bash are likely to be ignored by the game while this file is installed.

This mod uses the centered crosshair recommended by the STEP project. If you prefer your crosshair off to the right like in vanilla, then search for and delete the lines just below "; Crosshair location"

Note that this is an "ultra" preset. However, as a general rule, I tried not to include any settings that can be changed in-game, so if you set your graphics to something other than 'ultra' in the settings window, you will still be able to reduce your graphics somewhat, in return for increased performance. If you'd like to squeeze out some additional performance, you can also try reducing certain values (iShadowMapResolution, iWaterReflectHeight, iWaterReflectWidthare some low-hanging fruit, but there are tons of others.) and disabling certain variables (Anything marked as "; Required for ENB" is an obvious low-hanging fruit, but there are tons of other ones.).

Features

All broken settings fixed (Guides #1, 2, & 3)

All performance settings enabled (Guides #1, 2, & 3)

No more blocky shadows! (Guide #5)

The sun moves smoothly and continuously -- you'll never notice the sun move again! (Homegrown)

Fixed camera location on both horseback and foot (Guide #1)

Improved world map (Guide #1)

Larger, easier-to-read books and notes (G …