着陸後滾動(可控)

作者 Maxsu·版本 v1.0·更新於 2020-06-16

從高處着陸後,可以進行前滾動畫以減少跌落傷害。 此操作由自定義熱鍵激活。

截圖 共 3 張

模組介紹 作者原文

從高處着陸後,可以進行前滾動畫以減少跌落傷害。 此操作由自定義熱鍵激活。

警告!該mod當前不支持Gamepad用戶。

如果您真的很喜歡這個mod,並且想在遊戲手柄上使用它,請給我您的評論。如果有足夠多的人提出要求,我將來可能會考慮爲遊戲手柄提供支持。

這個mod是做什麼的?

這個模組可讓您以向前滾動的動畫着陸,以減少從高處跌落時的跌落傷害,這類似於其他ACT電子遊戲中常見的事情(例如刺客信條,Withcer 3等)。

着陸滾動事件完全由您控制,通過自定義熱鍵激活。您可以在着陸後選擇是否做滾動。

與Fall Rolling Animation SE相比,優點:

1.完全顛倒,着陸時可以選擇做不做滾動。

2.只有在執行着陸滾動時腳本纔會啓動。在正常遊戲時間內不會運行任何巡邏腳本。

3.沒有腳本動畫。您看到的滾動動畫只是用Dynamic Animation Replacer替換了香草遊戲的行走,跑步和跳躍着陸動畫。

您可以在下面觀看演示視頻:

如何設置mod?

1.安裝SKSE和SKYUI

2.安裝動態動畫替換器。

3.下載並使用Mod Manager安裝此Mod。

4.轉到Mod的MCM菜單,並映射“着陸滾動熱鍵”。

着陸後如何滾動?

當您從高處跌落並套上武器時,一旦您的角色的兩隻手臂完全張開,如下圖所示:

(注意:如果您具有更改香草遊戲跳轉動畫文件的動畫模塊,則此姿勢將發生變化)

一直按住前進鍵(“ W”),然後點擊您在MCM中映射的着陸滾動熱鍵,玩家角色在着陸時將進行前滾,並且跌落傷害將減少一半。

兼容性問題:

1.與包含以下動畫文件的PECA mod不兼容:

</ s> </ s> </ s>

劇透:表演

您必須從PECA文件夾中刪除上述所有hkx文件,否則滾動動畫將不起作用。

PECA mod包括FNIS PCEA,Project New Reign-Nemesis PCEA和分配,具體取決於動態動畫替換器的ActorBase PECA功能

2.與其他根據自定義條件使用Assignment的動態動畫替換模塊一起使用時(例如,FMAK)

如果此mod更改了上面的hkx文件,則必須更改此mod hkx文件的優先級,以使我的mod的優先級高於它。

3.不確定它是否與檢修香草遊戲的步行和跳躍行爲的模塊兼容,例如戰鬥遊戲檢修,360 Walk和Run Plus。需要確認。

問答:

問:我遇到了一些問題!

答:爲上帝着想,在向我報告任何問題之前,請先檢查以下內容:

1.您是否正確安裝了SKSE SKYUI和Dynamic Animation Replacer?

2.您在使用Gamepad嗎?

3.您安裝了任何PECA mod嗎?

4.您是否安裝了任何動態動畫替換器依賴模塊?

5.您是否在MCM中映射了熱鍵?

6.跳前您是否套上了武器?

7.您是否在左上方屏幕上看到消息“起落架準備就緒”?

8.如果看到該消息,在跌落過程中是否一直按住前進按鈕(“ w”)?

9.您是否安裝了任何步行和跳躍行爲大修模塊,例如“戰鬥遊戲大修”,“ 360 Walk和Run Plus”?

信用:

tktk1用於前滾hkx文件

DAR的Felisky384。

————————————————————————————

Warning! This mod is currently not support for Gamepad users.

If you really likes this mod and want to use it with gamepad, leave me your comments. If there are enough people requests, I may consider build support for gamepad in the future.

What this mod does?

This mod allows you landing in a forward rolling animation to reduce the fall damage when falling from high, kind of likes common things done in other ACT video game (likes Assassins’ Creed, The Withcer 3, etc.).

The landing roll event is totally under you control, It active by a custom hotkey. you can choose do or not do a roll after landing.

Advantages compares to Fall Rolling Animation SE:

  • Totally contrallble, you can choose do or not do a roll when landing.
  • Scripts only fire when you carry out a landing roll. No patrolling scripts running in normal gameplay time.
  • No scripted animations. The rolling animation you see is just the replacement of vanilla game's walking, running and jump landing animations by Dynamic Animation Replacer.

You can see the demo video below:

How to Setup the mod?

  • Install SKSE and SKYUI
  • Install Dynamic Animation Replacer .
  • Download and install this mod with mod manager.
  • Go to the Mod's MCM Menu and mapped the "Landing Roll Hotkey".

How to rolling after landing?

When you are falling from high with weapon sheathed, once your character has his two arms fully opened, as the picture shown below:

(attention: this posture will change if you have animation mods that change the vanilla game  jump animations files)

holding the forward key ("W") all the time and then tap the Landing roll hotkey you had mapped in MCM,  the player actor will then do a forward roll at the moment he lands, and the fall damage will reduce by half.

Compatibility Issue:

  • Incompatible with PECA mods that contains these animation files below:



Spoiler:

Show

You have to delete all hkx files above from your PECA folder, otherwise the roll animation will not work.

The PECA mod includes FNIS PCEA, Project New Reign - Nemesis PCEA and Assignment depending on ActorBase PECA features from Dynamic Animation Replacer 

  • When using with other Dynamic Animation Replacer mod that using Assignment depending on custom conditions( for example, FMAK)

If this mod changes the hkx files above, you have to change the priority of this mod hkx files, to let the priority of my mod higher than it.

  • Not sure if it compatible with mods that overhaul the vanilla game 's walking and jumping behavior such as Combat Gameplay Overhaul, 360 Walk and Run Plus. needs …

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
  3. 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
  4. 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。

不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。

檔案與校驗

檔案名稱
着陆后滚动(可控)
檔案大小
286.1 KiB