黑曜石天氣 - 沃特斯邊緣修復 - 黑暗之夜補丁
這是一個補丁,爲黑石天氣,水的邊緣修復和黑暗之夜一起玩得很好。
截圖 共 1 張
模組介紹 作者原文
這是一個補丁,爲黑石天氣,水的邊緣修復和黑暗之夜一起玩得很好。
首先,感謝kojak747,LoD7995和這些偉大的必備mods的作者不可原諒!所有功勞都歸功於他們的辛勤工作和努力。
此修補程序將條目從Water's Edge Fix(WEF)轉發到Darker Nights(DN),以便再次獲得黑夜。 WEF改變了OW的霧記錄,這些記錄也被DN引用。我使用黑曜石天氣(OW),所以我在安裝過程中採用了其他mod的Obsidian兼容版本。
所以這個mod用於以下設置並需要這個加載順序:
黑曜石Weathers.esp
ObsidianWaterFix.esp
DarkerNights.esp(等級3)
它只適用於此設置。如果您安裝了其他天氣類型,或者您正在使用其他黑暗級別,則可以通過SSEdit自行完成。只需選擇您最喜歡的DarkerNight預設(我的DN總是爲03)並執行以下操作:
感謝KernLTX這個小教程!
在SSEdit中加載訂單:
Obsidian Weathers.esp(或resp。你的天氣模型)
Obsidian WaterFix.esp(或相應修復天氣)
DarkerNights.esp
步驟1:
從ObsidianWaterFix.esp中選擇“Weather”GRUP,然後右鍵單擊
深層複製爲覆蓋... DarkerNights.esp
第2步。
將以下操作應用於衝突記錄:
第3步。
保存.esp並確保在關閉SSEdit之前檢查它
————————————————————————————————————————————————
First of all, thanks to kojak747, LoD7995 and unforbidable the authors of these great essential mods! All credit goes to their hard work and effort.
This Patch forwards the entries from Water´s Edge Fix (WEF) to Darker Nights (DN) in order to get dark nights again. WEF changed fog records from OW, which are also referenced by DN. I´m using Obsidian Weathers (OW), so i took the Obsidian compatible version of the other mods during installation.
So this mod is for following setup and needs this load order:
Obsidian Weathers.esp
ObsidianWaterFix.esp
DarkerNights.esp (Level 3)
It will only work with this setting. If you have another weather type installed, or you´re using another darkness level, you can do it by yourself via SSEdit. Just select your DarkerNight favorite preset (mine is always 03 for DN) and do the following manipulations:
Kudos to KernLTX for this little tutorial!
Load order in SSEdit:
Obsidian Weathers.esp (or resp. your weather mod)
Obsidian WaterFix.esp (or the according Fix to you weather)
DarkerNights.esp
Step 1:
Select "Weather" GRUP from ObsidianWaterFix.esp, right click, then
Deep copy as override into... DarkerNights.esp
Step 2.
Apply the following manipulations to the conflicting records:
Step 3.
Save the.esp and make sure it is checked before closing SSEdit
安裝與使用 安裝:按包內說明操作
- 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
- 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
- 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
- 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。
不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。