Jaxonz地圖標記(SSE端口)

作者 Justin Whittington·版本 v1.0·更新於 2019-05-03

標記和跟蹤任何東西!

截圖 共 5 張

模組介紹 作者原文

標記和跟蹤任何東西!

如果你曾經忘記了你的馬,隨從,甚至是喜歡的地方或物品,地圖標記就是爲你準備的!

只需使用默認熱鍵+ / =指向任何生物,物體或位置,它將在地圖標記任務中顯示爲目標(確保您打開任務)。

使用MCM菜單隱藏/取消隱藏/刪除標記。

Jaxonz不再爲Skyrim進行改裝,並允許接管她的工作。而且因爲我覺得移植非常有趣+這是一個非常好的mod + SKSE 64位終於可用了(雖然在alpha中)=我想我會把它移植到Skyrim Special Edition(Windows)。

我會說實話,我無法支持它 - 我知道,我很蹩腳,但這是一個限制,因爲我只是端口,不知道如何編寫或編寫腳本。

到目前爲止,我已經使用當前版本測試了它的所有功能:Skyrim特別版(Windows),SKSE 64位(2.0.6 ALPHA)和安裝了SE的SkyUI 5.2  - 它似乎對我有用。

我能夠使用默認熱鍵+ / =來標記人......和Frost沒有問題。

由於SKSE的要求,Xbox One或PS4版本將無法運行 - 除非SKSE的創建者找到將SKSE播種到這些平臺的方法。手指交叉。

原始mod和描述在這裏

所有的功勞都歸功於創始人,創造者,主人,母親 -  Jaxonz。

我只通過Creation Kit 64移植它。

一些已知的錯誤和提示:

*打開遊戲時保存,有時標記不會出現在地圖上,但地圖上會顯示,並且MCM設置將起作用。有時快速保存或保存和重新加載將修復它,或退出桌面和重新加載。

*我已經讀過Skyrim可能不喜歡打開太多的任務標記,如果JMM沒有在您的選擇上顯示任何標記,請嘗試關閉一些。

*如果您遇到一些問題,請嘗試卸載mod  - 顯然這會重置所有標記,打開Skyrim並繼續遊戲保存然後保存遊戲。退出桌面,重新安裝mod並重新打開天際,然後通過走近某人(到你看到他們的名字)看看mod是否工作,然後按+鍵(這是默認的熱鍵)。此時,任務應該開始。你需要去你的任務日誌並激活任務。它應該在這一點上起作用。

——————————————————————————————————————————————————

If you have ever lost track of your horse, a follower, or even a favorite place or item, Map Markers is for you!

Just point at any living being, object, or location by using the default hotkey +/=  and it will appear as an objective in the Map Markers quest (make sure you turn on the quest).

Use the MCM menu to hide/unhide/remove your markers.

Jaxonz is no longer modding for Skyrim and and has allowed taking over of her work. And since I find porting weirdly fun + this is an AWESOME mod + SKSE 64-bit is finally available (albeit in alpha) = I thought I would port it for Skyrim Special Edition (Windows).

I'll be honest, I will not be able to support it -- I know, I'm lame but it's a limitation because I only port and don't know how to code or write scripts.

So far I have tested all it's functions with the current versions of: Skyrim Special Edition (Windows), SKSE 64-bit (2.0.6 ALPHA) and SkyUI 5.2 for SE installed -- and it appears to work for me.

I was able to mark people...and Frost with no problem using the default hotkey +/=.

An Xbox One or a PS4 version will not work because of the SKSE requirement -- unless the creators of SKSE find a way to seed SKSE into those platforms. Fingers crossed.

Original mod with description here

All credit goes to the originator, the creator, the master, the mother -- Jaxonz.

I only ported it via Creation Kit 64.

Some known bugs and tips:

  • Upon opening a game save sometimes the markers will not appear over things BUT will appear on the map and the MCM settings will work. Sometimes a quicksave or a save and a reload will fix it, or a quit to desktop and a reload.
  • I've read that Skyrim might not like having too many quest markers turned on, try turning some off if JMM is not showing any markers on your selections.
  • If you're having some issues, try uninstalling the mod -- obviously this will reset all your markers, open Skyrim and continue from a game save then save game. Quit to desktop, reinstall the mod and reopen Skyrim, and see if the mod works by walking up close to someone (to where you see their name) and press the + key (which is the default hotkey). At this point, the quest should begin. You will need to go to your quest journal and activate the quest. It should work at this point.

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
  3. 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
  4. 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。

不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。

檔案與校驗

檔案名稱
Jaxonz地图标记(SSE端口)
檔案大小
10.1 KiB
SHA-256
c7ebff8fc891dff15730df6f4b8af4bef74905a3686463d1018797369f757fab
入庫時間
2026-10-10 18:00