受影響的Argonian重量滑塊用於SSE的尾部端口

作者 Camkitty·版本 vSSER1·更新於 2019-02-11

這是Camkitty的mod的簡單端口。 經過他的許可,我把它移植到了SSE。 編輯Argonian Tails,使它們隨角色的體重而變化。 細長的蝙蝠尾巴有薄的尾巴,笨重的蜥蜴人有笨重的尾巴。

截圖 共 2 張

模組介紹 作者原文

這是Camkitty的mod的簡單端口。 經過他的許可,我把它移植到了SSE。 編輯Argonian Tails,使它們隨角色的體重而變化。 細長的蝙蝠尾巴有薄的尾巴,笨重的蜥蜴人有笨重的尾巴。

這個mod增加了Argonian尾巴的變形,因此尾巴的重量將與體重相匹配。

即使角色的身體很笨重,它仍然讓我感到困擾的是,Argonian的尾巴一直很瘦。我見過的唯一一個解決這個問題的模型是Bigger Argonian Tails,它增加了所有Argonians尾巴的大小。但是,我總覺得較粗的尾巴在較小的角色上看起來太大了。

這個mod使用瘦小的香草尾巴作爲最小的變形,並添加一個新的網格,其大小與Bigger Argonian Tails大小相同,用於最大的變形。中等重量的Argonians將有一個正好在這兩個大小之間的尾巴。變形適用於NPC以及玩家角色。

此mod將與替換Argonian尾部網格的任何內容衝突。任何尾部裝甲mods在技術上都可以與此mod一起使用,但如果它們沒有變形網格,它們將無法正確反映角色的重量。

此mod與紋理和動畫替換器兼容。

此mod還具有向上移動尾部位置的選項:尾部更高,尾部略高。如果要使用這些,請下載主文件,然後使用所需的版本覆蓋模型。如果你只想要女性尾巴更高而不是男性,那麼只需要更換女性網眼。

信用:原始MOD由Camkitty在這裏。

————————————————————————————————————————————————

This mod adds morphs for the Argonian tails, so that the weight of the tail will match the body weight.

It always bothered me that the Argonian tails were constantly skinny, even if the character's body was bulky. The only mod I've seen that addresses this is Bigger Argonian Tails, which increases the size of the tails on ALL Argonians. However, I always felt that the thicker tails looked too big on smaller characters.

This mod instead uses the skinny vanilla tail as the smallest morph, and adds a new mesh that is roughly the same size as Bigger Argonian Tails for the largest morph. Middle weight Argonians will then have a tail that is right in between the size of these two. The morphs work for NPCs as well as the player character.





This mod will conflict with anything that replaces the Argonian tail mesh. Any tail armor mods can technically be used alongside this mod, but if they don't have morph meshes, they will not properly reflect the character's weight.

This mod is compatible with texture and animation replacers.

This mod also has options to move the tail position up: Tails Higher and Tails Slightly Higher. If you want to use these, download the main file and then overwrite the models with the version you want. If you want only the female tails to be higher but not the male, then only replace the female meshes.

CREDIT: ORIGINAL MOD BY Camkitty here.

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
  3. 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
  4. 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。

不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。

檔案與校驗

檔案名稱
受影响的Argonian重量滑块用于SSE的尾部端口
檔案大小
59.4 KiB