MoreCards
Ten new cards for the post-round draft: Overdrive, Supersize, Wreck, GUN!, Boink!, Bouncy, Floaty, Timber!, SWAT! and Bollard. Every effect is configurable. All players need the mod.
模組介紹 作者原文
MoreCards
Ten new cards for the Slip & Skid post-round draft. They roll alongside the game's own
cards, use the game's own card art and layout, and are picked and placed exactly the way
you already pick and place everything else.
What it adds
| Card | Rarity | What it does |
|---|---|---|
| Overdrive | Uncommon | +10% top speed for every car, for the round. |
| Supersize | Rare | +10% car size for every car. Permanent, and it stacks — four picks is roughly a 1.5x car. |
| Wreck | Off | A car you drop on the track as an obstacle, sized to match a real player car. |
| GUN! | Legendary | Bolts a gun to your car. It fires by itself every 6 seconds, and a bullet that touches a car knocks it up off the road and holds it slow for an instant. You are immune to your own. Set BulletsKill for a gun that kills outright instead. |
| Boink! | UltraRare | Land on top of another car to squash it and cut its speed by half for half a second. Side-swipes don't count — you have to come down on them. |
| Bouncy | Legendary | A swim ring around your car. Bump someone and they get shoved off line; you take a smaller shove back. Wind BouncePush up if you would rather launch people. |
| Floaty | Rare | -30% gravity on your car. Same jump, much more air. Lasts the match and stacks. |
| Timber! | Off | A tree you drop on the track. Solid trunk and solid canopy, each fitted to its own shape — you can't drive through either, or into the empty air around them. |
| SWAT! | Rare | A giant flyswatter in your own colour, pinned by its handle to a post beside the track. It parks out to one side, sweeps 90° across the road every few seconds with its pad on edge, and flings whoever it catches — where you end up depends on which part of the pad hits you and when. |
| Bollard | Uncommon | A retractable bollard set into the road, in your own colour. It sits flush for 3 seconds, rises, stands for 3 seconds, then drops again — solid the whole time it is up, and drivable straight over when it is down. |
Overdrive and Supersize buff the whole lobby, the way the game's own modifier cards do.
GUN!, Boink!, Bouncy and Floaty land only on the player who drafted them.
Every number above is configurable — see Configuration below.
Requirements
- Slip & Skid on Windows
- BepInEx pack for Slip & Skid (SlipSkid_Modding-BepInExPack_SlipSkid) — installed for you
by any mod manager, since it is declared as a dependency
Install
With a mod manager (recommended)
Install through Mod Manager or r2modman: find MoreCards, click Install,
then launch the game from the manager. The BepInEx pack comes along automatically.
By hand
- Install the BepInEx pack for Slip & Skid first, if you haven't already.
- Download this package and open the zip.
- Copy the BepInEx folder from inside the zip into your game folder, merging it with the
BepInEx folder that is already there. The plugin should end up at:
Slip & Skid\BepInEx\plugins\SlipSkid.MoreCards\SlipSkid.MoreCards.dll
The default game folder is:
C:\Program Files (x86)\Steam\steamapps\common\Slip & Skid
- Launch the game once. If the cards don't show up, open
Slip & Skid\BepInEx\LogOutput.log and look for a line starting with CustomCards: —
it says how many cards were registered and where they landed in the catalog.
Multiplayer
Everyone in the lobby needs this mod, on the same version, with the same settings.
Cards cross the network as positions in a shared list rather than by name. A player without
the mod has a shorter list, so the same roll hands them a different card — the draft desyncs
for everyone. Settings that change how a card behaves need to match for the same reason:
each machine simulates its own car, so a Floaty set to 30% on one PC and 60% on another means
your jumps land in different places on different screens.
Everything works in single player too.
Configuration
A config file is written on first launch:
Slip & Skid\BepInEx\config\slipskid.morecards.cfg
Every entry is documented in the file its
安裝與使用 安裝:按包內說明操作
- 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
- 多數模組依賴遊戲的模組載入器:常見做法是用社群模組管理器(如 r2modman)選中本遊戲安裝,由管理器自動處理載入器與依賴。
- 手動安裝時,把模組檔案放進遊戲目錄下對應的 Mod / plugins 資料夾。
- 啟動遊戲確認載入成功;帶「前置依賴」的模組需要把依賴一併安裝。
不同模組的安裝位置差異較大,包內說明是最可靠的依據。
下面這些內容需要先安裝,否則該模組不會生效: