BetterHauler
Makes the Hauler's cargo bed usable: read the screen at a glance, see how much more it will take, and stop nudging valuables into the box one by one.
截圖 共 4 張
模組介紹 作者原文
Better Hauler
Quality-of-life for the Hauler's cargo bed.
Everything ships at vanilla settings except the "$X LEFT" readout, so installing
it tells you more without changing how anything behaves. Turn up what you want.
Features
- "$X LEFT" on the cargo screen: the box holds a fixed amount of value and
then refuses everything, with nothing on screen telling you how close you are.
A second smaller line under the main number counts down to zero as you fill
it. The cap is read from the box itself, not assumed.
- Wider pickup volume: turn it up and valuables get taken in without being
shoved exactly into the box. Adjustable from 1x (vanilla, the default) to 10x.
Inside an extraction point it drops back to vanilla on its own, so the bed
doesn't grab valuables that are headed for delivery.
- Resizable screen and digits: two independent sliders, both at vanilla size
by default.
- See the pickup volume: optional translucent box showing exactly what the
range setting is doing. Local to you, no collider, never sent to other
players - purely a way to pick a number you like.
Requirements
Both install automatically with this mod - the list is here so you know what
ends up in your profile and why.
| Mod | Why |
|---|---|
| BepInEx | The mod loader itself |
| REPOConfig | Puts the settings in the in-game Mods menu. Without it they can still be edited in BepInEx/config/ningen.repo.betterhauler.cfg |
Settings
Mods > REPO Better Hauler in the main menu. Everything applies immediately -
no restart, and no need to respawn the Hauler.
| Setting | Default | What it does |
|---|---|---|
| Screen Size | 1.0 | Size of the screen panel. The digits keep their own size |
| Text Size | 1.0 | Size of the digits on the screen |
| Show Remaining | on | The "$X LEFT" line under the main number |
| Replace Main Number | off | Show the remaining amount instead of the value inside, as one number |
| Remaining Text Size | 0.45 | Size of that line, relative to the main number |
| Pickup Range | 1.0 | How much wider the bed's pickup volume gets |
| Show Pickup Range | off | Draw that volume as a translucent box |
| Pickup Range Opacity | 0.15 | How solid that box looks |
Sizes much above 1.5 push the digits outside the screen frame, and a large
Screen Size can poke the panel through the cargo box mesh - both are left to
you rather than capped.
Multiplayer
The game only runs the bed's pickup and capacity checks on the host, so
Pickup Range and everything under Unfair only do anything if the host has
this mod - and it's the host's settings that count. A client with different
Unfair settings will see its own "$X LEFT" figure, which won't match what the
host's bed actually accepts. The screen and text settings are local and work
for whoever installed it.
Unfair
Off by default, and kept in their own section at the bottom of the settings
page. These don't make the Hauler easier to read or handle - they change what
it's allowed to do. Fine for a relaxed run; not how the game is meant to be
played.
| Setting | Default | What it does |
|---|---|---|
| Cargo Limit | 20000 | How much the bed holds, in dollars (5,000 - 500,000, rounded to 1,000) |
| Unlimited Cargo | off | No cap - the bed never fills. The remaining line reads NO LIMIT |
| Accept Any Size | off | Take valuables of every size instead of refusing anything above small as "Too big". Big ones still have to reach the pickup volume, so this pairs with a higher Pickup Range |
Bug reports / feedback
Join the Discord:
Support
If you'd like to support development:
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: