ArenaRaceMultiplayerSpawnFix

版本 v4.0.2·更新於 2026-06-05

【Host Only MOD】Fixes Arena Race spawn position issues in large multiplayer lobbies.大人數でのアリーナレース開始時のスポーン位置の問題を解消します。

模組介紹 作者原文

ArenaRaceMultiplayerSpawnFix

This mod is a host-only mod that fixes Arena Race multiplayer spawn placement by randomizing player positions in a controlled grid and can optionally give everyone a start boost after the countdown.

Features

  • Adjusts only the initial player spawn positions in Arena Race.
  • Randomizes player placement every Arena Race so the host is not fixed to the same position.
  • Uses a controlled grid layout based on the vanilla spawn center and Arena Race course direction.
  • Allows the host to configure horizontal and vertical player counts.
  • Supports up to 20 for each horizontal and vertical count setting.
  • Can apply an optional level 3 boost to all Arena Race vehicles after the 3-2-1 countdown.
  • Does not add a GUI.
  • Does not write dedicated text logs.
  • Does not modify the Arena Race countdown, vehicle spawning, forced seating, hatch opening, or race state flow.

Host-only behavior

Only the host needs to install this mod.

The host applies the corrected player positions through the game's existing player spawn synchronization. The optional start boost is also applied by the host to the Arena Race vehicles.

Clients without the mod can join normally.

Config

| Setting | Description | Default | Minimum | Maximum |

|---|---|---:|---:|---:|

| Enabled | Enables this mod. | true | - | - |

| HorizontalPlayers | Number of players per horizontal row. | 10 | 1 | 20 |

| VerticalPlayers | Number of vertical rows. | 2 | 1 | 20 |

| StartBoostEnabled | Applies a temporary level 3 boost after the countdown. | true | - | - |

| StartBoostMultiplier | Level 3 boost power multiplier. | 10.0 | 0.0 | 100.0 |

Internal fixed layout values

These values are fixed internally and are not exposed as config settings.

| Value | Fixed setting |

|---|---:|

| Layout type | Grid |

| Horizontal spacing | 0.8 |

| Vertical spacing | 3.0 |

| Height offset | 5.0 |

| Backward offset | 10.0 |

| Anchor | Vanilla spawn center |

| Direction | Arena Race course direction |

| Player order | Random every Arena Race |

| Spawn slot order | Random every Arena Race |

| Start boost direction | Arena Race course direction |

Notes

  • Old config entries from earlier versions are no longer used.
  • If older Japanese config entries remain, delete the old config file and let the mod regenerate it.
  • The generated config file is REPOJP.ArenaRaceMultiplayerSpawnFix.cfg.

※Mod created by AI

ArenaRaceMultiplayerSpawnFix

REPOが好きな日本人のための日本人のみのREPOのDiscordサーバーあります!

參加は以下のリンクから!

このMODは、ホスト専用の、アリーナレースのマルチ開始位置を制御されたグリッド配置でランダム化し、必要に応じて321後に全員へ開始ブーストを付與するMODです。

機能

  • アリーナレースの初期プレイヤースポーン位置だけを調整します。
  • 毎回プレイヤー配置をランダム化し、ホストが同じ位置に固定されないようにします。
  • バニラのスポーン中心とアリーナレースのコース方向を基準に、グリッド配置を行います。
  • 橫方向の人數と縦方向の人數をホスト側で設定できます。
  • 橫方向・縦方向の人數設定は、それぞれ1~20まで対応します。
  • 321カウントダウン後に、全員のアリーナレース車両へ任意でレベル3ブーストを付與できます。
  • GUIは追加しません。
  • 専用テキストログは出力しません。
  • アリーナレースのカウントダウン、車両生成、強制乗車、牀開放、レース狀態遷移は変更しません。

ホスト専用仕様

導入が必要なのはホストのみです。

ホストがゲーム標準のプレイヤースポーン同期を使って、補正後のプレイヤー位置を反映します。開始ブーストもホスト側からアリーナレース車両へ適用します。

MOD未導入の參加者も通常通り參加できます。

設定項目

| 設定値名 | 設定內容説明 | 初期値 | 設定可能最小値 | 設定可能最大値 |

|---|---|---:|---:|---:|

| Enabled | MODを有効にします。 | true | - | - |

| HorizontalPlayers | 橫1行に並べる人數 | 10 | 1 | 20 |

| VerticalPlayers | 縦方向の行數 | 2 | 1 | 20 |

| StartBoostEnabled | 321後に一時的なレベル3ブーストを付與します。 | true | - | - |

| StartBoostMultiplier | レベル3ブーストの強さ倍率 | 10.0 | 0.0 | 100.0 |

內部固定値

以下はConfigから変更できない內部固定値です。

| 項目 | 固定値 |

|---|---:|

| 配置方式 | グリッド |

| 橫間隔 | 0.8 |

| 縦間隔 | 3.0 |

| 高さ補正 | 5.0 |

| 後方補正 | 10.0 |

| 基準位置 | バニラスポーン中心 |

| 基準方向 | アリーナレースのコース方向 |

| プレイヤー順 | アリーナレースごとにランダム |

| スポーン枠順 | アリーナレースごとにランダム |

| 開始ブースト方向 | アリーナレースのコース方向 |

注意事項

  • 舊バージョンのConfig項目は使用されません。
  • 古い日本語Config項目が殘っている場合は、古いConfigファイルを削除して再生成してください。
  • 生成されるConfigファイルは REPOJP.ArenaRaceMultiplayerSpawnFix.cfg です。

※AI生成MOD

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack

檔案與校驗

檔案名稱
ArenaRaceMultiplayerSpawnFix-4.0.2.zip
檔案大小
145.8 KiB