Quick Kiosk
Hold a key while opening the gate kiosk to instantly start the selected ascent.
模組介紹 作者原文
Quick_Kiosk
Quick_Kiosk lets you instantly start a flight at a chosen ascent by holding a key while opening the gate kiosk.
How to use
- Walk up to the Gate Kiosk.
- Hold one of the keys below.
- While still holding that key, press E to open/use the kiosk.
- The flight will start immediately at the mapped ascent.
Key mapping
Main keyboard
- ~ / backquote + open kiosk with E = Ascent 0 (Normal)
- 1 + open kiosk with E = Ascent 1
- 2 + open kiosk with E = Ascent 2
- 3 + open kiosk with E = Ascent 3
- 4 + open kiosk with E = Ascent 4
- 5 + open kiosk with E = Ascent 5
- 6 + open kiosk with E = Ascent 6
- 7 + open kiosk with E = Ascent 7
- 8 + open kiosk with E = Ascent -1
Numpad
- Numpad 1 + open kiosk with E = Ascent 1
- Numpad 2 + open kiosk with E = Ascent 2
- Numpad 3 + open kiosk with E = Ascent 3
- Numpad 4 + open kiosk with E = Ascent 4
- Numpad 5 + open kiosk with E = Ascent 5
- Numpad 6 + open kiosk with E = Ascent 6
- Numpad 7 + open kiosk with E = Ascent 7
- Numpad 8 + open kiosk with E = Ascent -1
Important note
- You must keep holding the chosen key when you press E on the kiosk.
- If no supported key is held, the kiosk will not use a quick-start shortcut.
Installation
Put Quick_Kiosk.dll into:
BepInEx/plugins
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。