PEAK Skygear
Previously 'Enhanced Balloon and Parasol Control' but now includes parachutes, rocketpacks and jetpacks! Change speeds, fuels, stamina, and more!
模組介紹 作者原文
PEAK Skygear ☂️🪂🎈🚀🎆
This mod is the rebuilt and extended version of my old mod "Enhanced Balloon and Parasol Control to add the new skygear and improve upong features and movement.
Take full control of balloons, parasols, gliders, parachutes, jetpacks, and rocketpacks. Tune air speed, sprint boosts, stamina, balloon pops, chute packing, jetpack fuel, rocket fuses, and more. Host settings sync to the lobby. Camera and hotkeys stay local.
Please provide feedback in the discord if you encounter any issues as I havent been able to fully test this mod and I stayed up super late and was very tired through alot of this mods creation! Sorry if things get weird lol!
- 🎒 Pairs well with PEAK Packs and Parachuted
- 🗣️ Bugs, comments, and ideas: Peak Modding Discord → #mod-releases
🌐 Multiplayer rules
Clients stay vanilla until the host’s config event arrives. If it never does (~12s), they stay vanilla for that room.
| | Host has PEAK Skygear | Host lacks PEAK Skygear |
|---|------------------------|-------------------------|
| Air speed, stamina, fuel, pops, parachute / rocket rules | ✅ Host settings apply to everyone | ❌ Vanilla flight (mod does nothing) |
| Unpacked parachute drops / rocket cut-off | ✅ Synced | ❌ Vanilla |
| Hotkeys (camera swap, cancel repack) | ⌨️ Local per player | ❌ No effect (vanilla) |
| First / third person rocket camera | 📷 Local per player | 📷 Vanilla camera |
- Host must have PEAK Skygear. A client with the mod cannot use it in a vanilla-host lobby. Config is only accepted from the master.
- Gameplay settings always sync from the host when the host has the mod (late joiners included). Host config changes mid-game re-sync automatically.
- Hotkeys and first-person camera are never host-synced (and they do nothing unless the host handshake succeeded).
Everyone in the lobby should install this mod so movement, packing, and rocket lighting match.
🛠️ Features
Shared air movement
- 💨 Per-gear movement multipliers for balloon, parasol, glider, parachute, jetpack, and rocket (default 1.5, range 0.25–5)
- 🏃 Sprint movement multipliers (default 1.5, range 1–2) stacked on top of movement. 1.5 × 1.5 = 2.25x vanilla air move. Hard cap 10x
- ⚡ Air sprint stamina — vanilla sprint drain is grounded-only, so this mod adds a real airborne sprint cost you can tune (default 0.025/s, same as vanilla ground sprint). Stamina bar is 0–1. 0 = no drain
- 🦶 Ground probe — extra balloon / glider / parasol move (and manual parachute deploy) only arms when there is clear air under your hips. Stops hop-running along ridges. Default 6m extra reach, cap 10. Open parachutes and jetpacks are not gated by the probe
Balloons 🎈
- Extra air move scales with balloon count: 1 balloon = vanilla air move, 6 balloons = full setting, each balloon from 2–6 adds 1/5 of the extra. 7+ does not go faster. 0 balloons = no bonus (you just drop)
- Crouch in the air pops one tied balloon at a time
- NeverPopUnlessManual — balloons never pop from time, height, or cactus; crouch still pops one
- PopHeight (vanilla 100) and PopTimeSeconds (vanilla 120 / 2 minutes). 0 = never pop from that cause
- CactusPops — sticky cactus can be set to not pop tied balloons
- Sprint boost can cost stamina (on by default)
Parasols ☂️
- Lateral move while an open parasol is gliding
- Crouch toggles a held parasol open / closed
- Sprint boost can cost stamina (on by default)
Gliders
- Lateral move while gliding
- Vanilla blocks sprint on the glider — this mod unblocks it
- UsesStamina and SprintUsesStamina are independent: regular glide can be free while sprint still costs
- Regular glide drain replaces the prefab stamUse (default 0.025/s). Extra opening cost stays vanilla
- Glide still works at 0 stamina if UsesStamina is off
Parachutes 🪂
- Manual parachutes (on by default) — chutes only open when you crouch or use the item. Vanilla auto-open is blocked except for a shore-drop free chute (hasParachute flag, no item/slot — works with Parachuted), which auto-opens once. You mus
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: