Bleeding

版本 v1.0.0·更新於 2026-09-07

Bleeding status with 4 severity levels, blood trails, blood pools, drip sounds, movement slowdown. Custom expedition menu integration. Part of the TambiStudios Afflictions Pack.

模組介紹 作者原文

Bleeding

Falls now cost you something you have to bandage back up.

Part of the TambiStudios Afflictions Pack (with DizzinessMod and Fatigue).

How bleeding works

Falls above the height threshold now start bleeding. Severity depends on how far you fell:

| Level | Trigger (Fall Damage x1) | Duration | Screen intensity |

|---|---|---|---|

| Light | ≥ 10 m | 15 s | Faint |

| Medium | ≥ 20 m | 30 s | Noticeable |

| Heavy | ≥ 30 m | 60 s | Strong |

Thresholds scale with your Custom Run Fall Damage setting.

While bleeding:

  • Stamina regeneration is disabled.
  • Red overlay on the edges of the screen, pulsing with your heartbeat. Intensity scales with severity.
  • Blood drop icon appears in the top-right corner.
  • Blood trail — moving while bleeding leaves red drops on the ground behind you. They fade over ~25 seconds.

How to cure it

  • Any Injury-healing item — bandage, medipack, panacea, red healbush, or any modded item that removes Injury.
  • Any cure-all item — items using the "clear all statuses" action.
  • Wait it out — bleeding stops naturally after the duration.

Recovery is a smooth 1.6-second fade — the red overlay and drop icon ease back to zero instead of snapping off.

Synergy with DizzinessMod

If you also have Tambi_Studios-DizzinessMod installed, heavy bleeding (level Medium or Heavy) slowly builds passive dizziness. No hard dependency; kicks in only when the mod is present.

Configuration

BepInEx/config/com.tambistudios.bleeding.cfg:

[Trail]

EnableBloodTrail = true

DropLifetimeSeconds = 25

MaxActiveDrops = 40

[Visuals]

ScreenOverlayIntensity = 1.0 # 0 to fully disable the red overlay (motion sickness comfort)

Compatibility

  • Spider grabs are recognised via the Web status and don't trigger bleeding anymore (fixes the "spider yanks you 60 m and you die instantly" bug).
  • Safe in solo and multiplayer.

Installation

Use r2modman or install manually. Requires: BepInEx 5.4.x (PEAK pack).

Credits

Made by Tambi Studios.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack_PEAK

檔案與校驗

檔案名稱
Bleeding-1.0.0.zip
檔案大小
991.4 KiB