BetterPlayerDistance

BetterPlayerDistance

English

Teammate tracking for PEAK, with a vanilla look that makes finding your group and helping downed players easier.

This mod is built by top-tier AI (opus, fable) and goes through repeated testing and verification before release to keep it reliable. If an unexpected issue still slips through, I'm sorry — come nudge me on 2323086800@qq.com 😕

Features

• Find your team: see names, distances and host crowns, even through obstacles. When close-range distance is disabled, only the distance yields while vanilla would show the name; looking away keeps the distance available.
• Help downed teammates: check status and countdowns, with edge indicators for downed or dead teammates outside your view. Death markers remain for 10 seconds.
• Make it yours: adjust text size, height, opacity and outlines; choose icons, kaomoji or text for status markers. Font settings use 0 for the base size, positive values to enlarge and negative values to shrink.
• Day and night: optionally pair with TimeTheme for day/night colors. The mod works without it too.
• Play nice with other mods: Compatibility Mode keeps the vanilla nameplate visible and hands over to it up close, for mods that draw on it (e.g. Overhead Stamina).

Controls

AlwaysOn by default. Press C to hide or show labels. Hold and timed Toggle modes are also available.

Show Distance Up Close is off by default. Distance is hidden only while vanilla would currently show the nearby name; enable it to keep distance visible at all times.

Compatibility Mode is off by default. Turn it on if another mod draws on the vanilla nameplate: vanilla shows the name up close, this mod takes over everywhere else with a 0.1s cross-fade, and Name Font Size applies to both.

Installation & Settings

• Install BepInExPack.
• Place BetterPlayerDistance.dll in BepInEx/plugins, then launch the game.
• Customize appearance and display behavior in your in-game mod settings.

Config: BepInEx/config/com.AiAe.betterplayerdistance.cfg

Since 1.1.4, distances and Max Display Distance use the same game metres as campfires (currently 1 Unity unit = 1.6 game metres). The default limit is 1600 m, adjustable from 80 to 2400 m; the physical range is unchanged. Existing limits are converted once before settings load, without adding a toggle. The old cfg is backed up as.unity-units-.bak; keep the adjacent *.cfg.game-meters-v1 migration record with the cfg when copying settings. To roll back, restore both the old DLL and the backup cfg, and remove that migration record. Fonts and near-name visibility are unchanged.

Feedback & bug reports: 2323086800@qq.com

中文

爲 PEAK 提供貼近原版風格的隊友定位：看清位置、掌握狀態，讓尋找隊友和昏迷救援更直觀。

模組由頂級AI(opus,fable)製作，發佈前會多次測試校驗，來確保其可靠性。如果還是有意料外的問題我很抱歉，可以到 QQ 羣：1104320838 來鞭策我😕

功能

• 隊友定位：顯示名稱、距離和房主皇冠，隔着障礙也能查看隊友標籤。關閉貼近距離後，僅在原版此刻應顯示名稱時讓出距離；轉開視角仍可查看距離。
• 昏迷救援：查看狀態與倒計時，昏迷或死亡隊友在視野外時會有邊緣指向；死亡位置標記保留 10 秒。
• 外觀自定義：調整字號、高度、透明度和描邊，爲狀態提示選擇圖標、顏文字或文字。字號設爲 0 跟隨基礎大小，正數放大、負數縮小。
• 晝夜配色：可選搭配 TimeTheme，讓標籤跟隨晝夜變色；不安裝也能正常使用。
• 兼容其他模組：兼容模式保留原版頭頂名稱，近處交還給原版顯示，供依賴原版名牌的模組使用（例如頭頂耐力）。

使用

默認常顯，按 C 隱藏或顯示整塊標籤。也支持按住顯示（Hold）和定時切換（Toggle）。

「貼近是否顯示距離」默認關閉。 只有遊戲原版此刻應顯示近處名稱時才隱藏距離；轉開視角等其他情況下仍顯示距離，開啓後則全程顯示距離。

「兼容模式」默認關閉。 有其他模組依賴原版頭頂名稱時打開：近處由原版顯示名稱，其餘情況由本模組接上，兩邊 0.1 秒交叉漸變；「名字字號」同時作用於兩邊。

安裝與設置

• 安裝 BepInExPack。
• 將 BetterPlayerDistance.dll 放入 BepInEx/plugins/，然後啓動遊戲。
• 在遊戲內模組設置中調整外觀和顯示方式。

配置文件：BepInEx/config/com.AiAe.betterplayerdistance.cfg

從 1.1.4 起，距離數字和最大顯示距離統一使用原版營火的遊戲米（當前 1 Unity 單位 = 1.6 遊戲米）。默認上限爲 1600 米，可調範圍 80～2400 米，實際顯示範圍不變。舊上限在設置加載前自動換算一次，不新增開關。舊 cfg 備份爲.unity-units-.bak；複製配置時請連同旁邊的 *.cfg.game-meters-v1 遷移記錄一起保留。回退時同時恢復舊 DLL 和備份 cfg，並移除該遷移記錄。字體、原版近處名稱顯隱不變。

反饋 Bug 或建議：QQ 羣 1104320838。