RemoteVolumeControl
A mod for Lethal Company allowing you to change the client-side volume of all Boomboxes from anywhere on the map with [ and ].
模組介紹 作者原文
RemoteVolumeControl for Lethal Company
A mod for Lethal Company allowing you to change the client-side volume of all Boomboxes from anywhere on the map.
This is a fork of the boombox volume control mod with two small differences:
- Default keybinds are [ and ] instead of o and p.
- Volume change increments are 10% instead of 20%.
Big thanks to Inoyu for creating the boombox volume control mod, which helped me greatly in figuring out how all this stuff works, and provided 99% of the code for this fork.
I take no credit for this mod, I only made some small modifications:)
Default Keybinds
Below are the default keybinds. They can be changed in the normal keybind settings if you wish.
- Volume Down = [ (Left Square Bracket)
- Volume Up = ] (Right Square Bracket)
Installation
This mod requires BepInEx and InputUtils.
Use a mod manager (r2modman is highly recommended), it will handle everything for you.
If you wish to install this manually, place the.dll in you BepInEx\plugins after installing the above requirements.
Compatibility
This mod is intended for use with DiscJockey, however should work with any other Boombox mod (or even just the vanilla Boombox).
If you are using other mods that use the keybinds for [ and ], you will need to rebind the keys for this mod or your other one.
Changelog
v1.0.0
- Ability to control all client-side Boombox volumes on the map from wherever you are (in increments of 10%)
- Ability to remap the keybinds
Issues
If you have any issues, please submit them on the GitHub page.
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝，否則該模組不會生效：