Stgw57 Rifle

版本 v1.1.1·更新於 2026-07-11

Cold War Battle Rifle Swiss Galore!

模組介紹 作者原文

Stgw. 57 Battle Rifle

The Stgw 57 (Sturmgewehr 57) or sometimes known as the STG 57 or SG 510, is a Swiss 7.5×55 mm service rifle adopted in 1957 and made by SIG.

It was designed to be a kind of Jack of all trades weapon, with all elements combined into one battle rifle, foldable irons, bipods, the ability to launch rifle grenades, you get it.

The mod is a more redux of Potatoes' original version with my own spin, it comes with movable bipod for either front or rear placement, folding sights, winter trigger, rifle grenades and also its 4x magnification scope.

The rifle can fire rifle grenades, with HEAT, Frag and smoke rounds, and usually comes in 6 round metal magazine that is loaded with blanks. Yes, use blanks or you'll have a bad day.

As it also takes suppressor mounts too, it can have the option to mount either its bespoked scope or a small hidden rail at the top too. And following Potatoes' fashion, you too can swap out the rear stock (but swapping back will cause it to bug out!)

Features

  • Swiss rifle chambered in 7.5mm Swiss! (Works only with my own ammo pack there)
  • Has 2 magazine sizes
  • Bipod, foldable irons, winter trigger, the true alps experience!
  • Hidden top rail, rear stock can be changed via pistol stock option, bespoke 4x scope and also the ability to fire 3 different rifle grenade types (Use blanks!!11!) and also bayonet!
  • Rifle Can be found in Firearms > Battle Rifle
  • Rifle Grenades can be found in Ammo > Cartridge or ammo spawner
  • Also aded as a new update is the Rico Special! Watch out for your ears. To turn on or off the tinnitus effect, press the stock release button at the stock area, you'll hear a click.

Model from Ovidiu, with graciously donated by Rivi; With massive thanks to anthroporrhaistes, somegundamfan and Anomeat! Thank you Lincy for the amazing idea and support of the Rico Special!

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

devyndamonster-OtherLoadercityrobo-OpenScripts2WFIOST-H3VRUtilitiesAndrew_FTW-FTW_Arms_AFCLVolks-7_5x55mm_Swiss_Ammo

檔案與校驗

檔案名稱
Stgw57_Rifle-1.1.1.zip
檔案大小
40.1 MiB