Nambu Type 2 CoD WWII
Automatic SMG with low recoil, moderate fire rate and mid-range combat capabilities.
模組介紹 作者原文
Automatic SMG with low recoil, moderate fire rate and mid-range combat capabilities.
The Nambu Type 2, a Japanese World War II closed bolt submachine gun, given fresh coats of paints and some modifications. The Mark III Free Gun Reflector Sight is included as bespoke attachments to the Nambu Type 2, a British sight used on anti-aircraft guns in WWII, that is used as the reflex sight for all Axis SMGs in WWII.
The Nambu Type 2 and the Mark III Free Gun Reflector Sight from Call of Duty: WWII, including all its anachronisms and strange measurements, because skins are fun. All magazines are compatible with the other Nambu Type 2 variants.
Note: The weapons in this pack are a fictionalized version of the Nambu Type 2A, which turns it into an open bolt weapon. Other incorrect operations include the lack of a reciprocating barrel shroud-bolt combination, and a fake bolt handle on the right side. **These are intentionally kept incorrect because this is how the gun is modelled and operated in WWII.**
This mod was featured in Modmas 2022!
Features
- The Nambu Type 2 and the Stitches, Second Horseman, The Dragon II and Wraith variants are all found in the SMG section of the item spawner, fire at ~681 RPM, with a 30 or 45 round magazine each, and are chambered in 8x22mm Nambu.
- All magazines are usable with all variants, enjoy playing mix and match!
- Muzzle, Sight and Lens attachment points to fit the HUB-23 Suppressor, Mark III Sight, and the Lens Sight.
- All models, sounds and textures ripped directly from Call of Duty: WWII.
- 10 magazines and 3 reflex sights
- The ladder sights go up to 450m. There is a functional ejection port dust cover that MUST by flipped open for the gun to operate, as it is considered a safety.
Planned
- Working strap jigglebones
Changelog
1.0.0
- Initial release
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: