HuntSevenSights

版本 v1.0.6·更新於 2026-10-11

The Sparks Sniper in the legendary skin Seven Sights chambered in 45-110 Sharps with 8x scope from Hunt: Showdown! Updated eye relief code!

模組介紹 作者原文

Hunt: Showdown Seven Sights

The Sparks Sniper chambered in 45-110 Sharps from Hunt: Showdown!

Single fire with some unique controls with permanently attached 8x zoom scope.

UPDATE 1.0.4 - I've added significant changes to how the scope works inspired by H3VR2's upcoming changes. Since the eye relief is so close to the eyepiece, I've restored the mounting and scale to how it should be and now a dynamic system adjusts your shouldering position based on your eye position to the scope. This allows you to make quick glances outside of the scope which will zoom out relative to your speed and distance away from the eyepiece. I believe I have this tweaked enough to feel natural and I hope everyone enjoys it.

This has a hybrid control scheme with two buttons controlling the lever and bolt similar to my Springfield rifle mod.

The lever can be actuated only after the hammer is pulled back first.

Once a round is loaded into the chamber, the chamber locks out the motion controls, so if you need to unload the live round, you need to use the button to open the lever and eject the round.

This may sound like a lot but you do get the hang of it pretty quickly. My goal was to make the Sparks rifle a bit faster to use and feel more active than the vanilla Sharps rifle.

Seven deaths sated one man's vengeance, seven vistas were marred with bloodshed, seven alignments made of eye, sight, and heart. In the end, eight graves were dug, but this Sparks LRR Sniper still changes hands, always adding to the count

Features

  • Hunt: Showdown sounds
  • Accurate scale and details
  • Suppressor mount
  • Custom controls
  • Rapid ejector similar to in game and real life

ObjectID List

  • bitwizrd.HuntFirearm.SevenSights

Metadata

  • Era: WildWest
  • Year Introduced: 1871
  • ModTags: BitWizrd, Hunt: Showdown

Spawner Menu

  • Firearms/BreechloadingRifle

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

Sirdoggy-OtherLoaderPatched

檔案與校驗

檔案名稱
HuntSevenSights-1.0.6.zip
檔案大小
43.3 MiB