Oce CVN74

版本 v1.3.1·更新於 2025-02-11

Chief, remove the wheel chock.

模組介紹 作者原文

Oce_CVN74

A static AircraftCarrier that provides a plane launcher at the front left catapult. Made for F-14D mod.

How to use the launcher

First, taxi your jet and drive the launch bar into the catapult, the bar will auto hooked.

Grab the throttle and push it to fullpower (you shouldn't power it to maximum irl tho), make sure your right hand is empty then press RIGHT grip and RIGHT trigger button

and plane will be launched within 5 seconds.

Once launched, throttle to 100% and pull the stick to take off.

Notice

The water may glitch heavily.

DO NOT Restart the scene when there's player in the aircraft, it will break the scripts!

Change Log

1.0.0 Added the map.

1.0.1 Launcher tweaked.

1.0.2 Launcher tweaked x2.

1.1.0 Landing wires kinda works...

1.1.1 Skybox changed.

1.2.0 New catapult for new F-14 script, When you taxi your F-14 to the left cat, click the gear lever to lower the launch bar, then once the bar is at the right place

your plane will be hook into the position, all you need to do is waiting to launch. When doing CASE1 recovering, left hand press

thumbstick backward to lower the hook.(Landing on a static ship in a TomCat could be hell too difficult!)

1.2.1 There will be a S3B in the low altitude await to air-refueling (Throttle thumbstick forward to open the refueling probe).

1.2.2 Added colliders to the S3B and tweaked its distance from the CVN74.

1.2.3 Tweaked air-refueling probe and catapult to make them less cursed.

1.2.4 Quick fix for the refuelingprobe.

1.2.5 Catapult script changed and add lifter to enter the hanger.

1.2.6 Fixed respawn error.

1.2.7 Added catapult support for F-14B.

1.2.8 Tweaked ocean surface layer for Jester Eject instruction.

1.3.0 Added arresting wires and Jester landing comments.

1.3.1 Adjusted wire tension and delayed Jester landing comments after hooking the wire.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

nrgill28-Atlasdevyndamonster-OtherLoaderWFIOST-H3VRUtilities

檔案與校驗

檔案名稱
Oce_CVN74-1.3.1.zip
檔案大小
86.9 MiB