SpeedrunTypingSound

版本 v1.0.0·更新於 2026-10-08

Replaces the GTFO terminal typing sound with frantic sweaty-gamer keyboard mashing.

模組介紹 作者原文

SpeedrunTypingSound

Replaces the GTFO terminal typing sound with frantic, sweaty-gamer keyboard mashing.

Made with AI.

Configuration

Can be found in Oxylight.SpeedrunTypingSound.cfg, hot reload supported!

| Setting | Default | Description |

| --- | --- | --- |

| Enabled | true | Replace the terminal typing sound. |

| ReplaceThirdPerson | true | Also replace the sound you hear when teammates typing in terminal. |

| Volume | 0.5 | Loudness, 0.0–1.0. 0.0 mutes completely. |

| HearingDistanceMeters | 15 | How far away you hear it, 0–50 m in 5 m steps. 0 = you hear nothing. |

The slider is linear in decibels, not amplitude, so it tracks perceived loudness and the useful range spans the whole slider rather than bunching up near zero. Resolution is 2 dB per step, over 31 steps.

| Volume | Result | Amplitude |

| --- | --- | --- |

| 1.00 | 0 dB — original, very loud | 1.000 |

| 0.75 | −15 dB | 0.178 |

| 0.60 | −24 dB | 0.063 |

| 0.50 | −30 dB (default) | 0.032 |

| 0.40 | −36 dB | 0.016 |

| 0.25 | −45 dB | 0.006 |

| 0.00 | fully muted | 0 |

Mute is a real mute: the plugin substitutes Wwise event id 0, so no sound is posted at all rather than an inaudible one being mixed.

Hot reload

This mod watches its own config file and calls ConfigFile.Reload() when it changes, so saving the file applies the new volume on the next keystroke — no restart, no returning to lobby.

Credits

Thanks to AttackOnGlaggleland for the idea and samples. Contact me anywhere if you have any complaints.

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 多數模組依賴遊戲的模組載入器:常見做法是用社群模組管理器(如 r2modman)選中本遊戲安裝,由管理器自動處理載入器與依賴。
  3. 手動安裝時,把模組檔案放進遊戲目錄下對應的 Mod / plugins 資料夾。
  4. 啟動遊戲確認載入成功;帶「前置依賴」的模組需要把依賴一併安裝。

不同模組的安裝位置差異較大,包內說明是最可靠的依據。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack_GTFO

檔案與校驗

檔案名稱
SpeedrunTypingSound-1.0.0.zip
檔案大小
743.6 KiB