拾音器

作者 InfamousSabre·版本 v2.1·更新於 2018-08-31

截圖 共 2 張

模組介紹 作者原文

皮卡採用與GTA V的武器輪和武器皮卡不同的方法。

武器輪 -

之前:你有8個插槽,每個插槽可以容納多個武器,基本上可以讓你在口袋裏攜帶一個完整的軍械庫。

之後:您有任意數量的插槽(默認4),每個插槽一次只能容納1個武器。

武器拾取 -

之前:所有武器拾取器都會被自動拾取,每個拾取器總是有完整的彈藥,即使放棄它的NPC已經使用了一些。所有武器拾取器都沒有附件,即使前一個擁有者裝備了它們。

之後:您可以選擇自動拾取武器。如果武器所屬的插槽已滿,您可以選擇交換武器。如果您當前持有的任何武器使用相同的彈藥,您可以自動或手動選擇彈藥。武器拾取器僅包含其前任所有者留在其中的任何彈藥。武器皮卡將配備前任所有者使用的任何附件。彈出窗口會顯示附近的武器拾取器,讓您知道他們的彈藥數量和類型。

可見裝載 -

啓用後,Visible Loadout將在您的播放器上的各種連接點上顯示您攜帶但當前未使用的武器。每個插槽都有一個連接點。如果您需要4個以上的插槽,只需複製一些slot.xml中的現有插槽即可。您也可以編輯他們的物理附着點。由於所有武器都不相同,一些武器有自己的附件偏移量,以便更好地適應玩家。現在可以在pickups.xml中找到這些每武器偏移量。

一些彈藥數量調整爲更加現實。進入某些車輛獲得的所有武器都被禁用。

這個mod改變了許多遊戲文件。因此,它與包括RDE在內的大量武器/現實主義模式不兼容。如果你想將這個mod與任何不兼容的mod一起使用,你所要做的就是合併衝突的文件。任何獎勵數據必須反映皮卡遊戲文件數據,否則皮卡將無法正常工作。可以更改彈藥類型,但要注意已刪除所有庫存彈藥類型。

如果您合併文件以使Pickups與其他mod兼容,請慷慨地在GTA5-mods.com上發佈它們,以便其他人可以從您的辛勤工作中受益。

要更改插槽數,您只需編輯pickups.xml中的數據,以便武器使用新插槽。如果pickups.xml中的最高'group'屬性爲7,那麼您將有8個插槽。如果它是3,你將有4個插槽。

您還需要正確的紋理(在Pickups / Wheel /中)以獲得您想要使用的插槽數量。我已經爲4和8個插槽添加了模板和紋理。使用模板爲您想要的插槽數量製作自己的紋理,然後按照我使用的命名方案。該腳本使用此命名方案來加載適當的紋理。如果找不到它們,腳本將無效。

pickups.xml中的所有數據都是可編輯的,因此您可以根據需要更改武器的顯示名稱。請注意,這些名稱更改僅影響Pickups腳本。它不會影響庫存武器輪或彈藥。

安裝

--Script安裝 -

使用OpenIV的Package Installer安裝Pickups.oiv。如果要手動安裝,請將程序包重命名爲Pickups.zip。所有文件都以非常易於理解的結構佈局。

  • (必備條件) -

你需要Alexander Blade的C ++ Scripthook

(

已知的問題

  • 拾取器型號上未顯示附件。

由於DX鉤子,自定義武器輪,圖標和文本邊緣模糊。

Pickups takes a different approach to GTA V's weapon wheel and weapon pickups.

Weapon Wheel -

Before: You have 8 slots where each slot can hold multiple weapons, essentially enabling you to carry an entire armory in your pocket.

After: You have any number of slots you want (Default 4), and each slot only holds 1 weapon at a time.

Weapon Pickups -

Before: All weapon pickups are automatically picked up and each pickup always has full ammo, even if the NPC who dropped it already used some. All weapon pickups have no attachments, even if the previous owner had them equipped.

After: You have the choice of automatically picking up weapons or not. If the slot the weapon belongs to is already full, you will have the choice to swap weapons. If any weapon you are currently holding uses the same ammunition, you have the choice between automatically or manually taking ammo. Weapon pickups only contain whatever ammunition was left in them by their previous owner. Weapon pickups will be equipped with any attachments the previous owner was using. A popup will show over nearby weapon pickups to let you know of their ammo count and type.

Visible Loadout -

When enabled, Visible Loadout will display weapons you're carrying, but not currently using, on various attachment points on your player. There is one attachment point for each slot. If you require more than 4 slots, simply duplicate some of the existing slots in slots.xml. You may also edit their physical attachment points. As all weapons are not made equal, some weapons have their own attachment offsets in order to better fit on the player. These per-weapon offsets are now found in pickups.xml.

Some ammunition amounts are adjusted to be more realistic. All weapons acquired by entering certain vehicles are disabled.

This mod changes many game files. Due to this it is incompatible with a large amount of weapon/realism mods including RDE. If you want to use this mod with any incompatible mod, all you must do is merge the conflicting files. Any reward data MUST reflect Pickups game file data, otherwise Pickups will not work properly. Ammo types can be changed, but beware that all stock ammo types have been removed.

If you merge files to make Pickups compatible with other mods, please be generous enough to release them on GTA5-mods.com so others can benefit from your hard work.

To change the number of slots, you simply need to edit the data in pickups.xml so that weapons use new slots. If the highest 'group' attribute in pickups.xml is 7, you will then have 8 slots. If it's 3, you'll have 4 slots.

You will also need the right textures (in Pickups/Wheel) for the number of slots you wish to use. I've included a templat …

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
  3. 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
  4. 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。

不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。

檔案與校驗

檔案名稱
拾音器
檔案大小
2.3 MiB