StackingEnhancement

版本 v0.1.0·更新於 2026-05-07

Adds late-game cargo stacking technologies up to 8 and lets automatic pilers output stacks above 4.

模組介紹 作者原文

堆疊增強

爲遊戲後期添加超過 4 層的貨物堆疊層數,並且讓自動集裝機再次偉大!

新添加的升級將能提高物流運輸站的吞吐,結合自動集裝機獨佔的堆疊能力,將會對後期的產線設計帶來更多的可能性。需要注意,這可能會導致部分依賴物流運輸站吞吐速度的藍圖無法正常工作。

內容

  • 添加了 5~8 層堆疊增強升級科技,需要運輸站集裝物流等級 3 作爲前置升級。
  • 每級升級會將物流運輸站的貨物堆疊上限提升 1 層,並允許自動集裝機生成相應層數的貨物。
  • 白爪(集裝分揀器)在卸貨時仍然保持最高 4 層的堆疊限制,在默認配置下只有自動集裝機可以在運輸站以外生成大於 4 層堆疊的貨物。
  • 超過 4 層的貨物會在傳送帶上正確渲染(部分場景下會出現穿模)

選項

配置文件位於 BepInEx/config/com.komonad.dsp.stackingenhancement.cfg。

  • EnableCargoStackShader(默認開啓):啓用自定義傳送帶貨物渲染 shader,支持 >4 層的正確高度和側面層分線。如果遊戲更新後出現渲染異常,關閉此選項可回退到原版渲染。
  • EnhancePileSorter(默認關閉):開啓後白爪(集裝分揀器)的輸出堆疊上限跟隨堆疊增強科技等級,而非最高 4 層。

兼容性

  • 當前適配遊戲版本:0.10.33.25830
  • 已測試與 GenesisBook 3.2.3、OrbitalRing 1.0.5 的兼容性。如遇到其他 MOD 的兼容問題歡迎反饋。

問題反饋

如果遇到報錯、顯示異常或科技沒有出現,請在 GitHub 提交 issue,並附上:

  • 問題描述
  • 遊戲版本
  • mod 版本
  • 已安裝 mod 列表
  • BepInEx/LogOutput.log

Stacking Enhancement

Adds cargo stacking beyond 4 layers in the late game — make automatic pilers great again!

The new upgrades increase logistics station throughput. Combined with automatic pilers' exclusive stacking ability, this opens up more possibilities for late-game production line design. Note that this may cause some blueprints that depend on logistics station throughput rates to stop working correctly.

Features

  • New technologies: Stacking Enhancement levels 5–8. Prerequisite: Logistics Piling level 3.
  • Each level raises the logistics station cargo output stack limit by 1 and allows automatic pilers to produce stacks of the corresponding height.
  • Pile sorters retain their 4-layer cap; only automatic pilers can create stacks above 4 layers outside of stations.
  • Belt rendering supports cargo stacks above 4 layers (minor clipping may occur in some scenarios).

Options

Config file: BepInEx/config/com.komonad.dsp.stackingenhancement.cfg

  • EnableCargoStackShader (default on): Enables the custom belt cargo rendering shader with correct height and side layer lines for >4 stacks. Disable if rendering breaks after a game update.
  • EnhancePileSorter (default off): When enabled, pile sorters output stacks matching the Stacking Enhancement tech level instead of the default 4-layer cap.

Compatibility

  • Tested against game version: 0.10.33.25830
  • Tested compatible with GenesisBook 3.2.3 and OrbitalRing 1.0.5. Feedback welcome if issues arise with other mods.

Feedback

If you run into errors, visual issues, or missing technologies, please open an issue on GitHub and include:

  • A description of the problem
  • Game version
  • Mod version
  • Installed mod list
  • BepInEx/LogOutput.log

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

xiaoye97-BepInExCommonAPI-CommonAPIxiaoye97-LDBTool

檔案與校驗

檔案名稱
StackingEnhancement-0.1.0.zip
檔案大小
67.2 KiB