ShowDamageNumber
Display damage numbers during battles. 添加戰鬥時的傷害數字顯示。
模組介紹 作者原文
ShowDamageNumber / 顯示傷害
- Display damage numbers during battles.
- You can press Z to open the battle panel and turn on or off the damage number display in the upper right corner.
- Only damage numbers on the same planet where Icarus is landing will be displayed. If Icarus is in space, only damage numbers for space units within the same star system will be displayed.
- 添加戰鬥時的傷害數字顯示。
- 可以按下Z打開戰鬥面板,在右上角開啓或者關閉傷害數字顯示。
- 只有在與玩家處在同一個行星上的傷害數字纔會被顯示,若玩家在太空中,只有同星系內的太空單位的傷害數字會被顯示。
Configuration / 個性化配置
You can set in the config file whether to display damage numbers when different kinds of units are hit, which are
- Gound Enemy (default display)
- Space Enemy (default display)
- Icarus' Shield (default NOT display)
- Ally Buildings and Fleets (default NOT display)
- Gound Sundries (default display)
你可以在配置文件中自定義不同種類單位被擊中時,傷害是否顯示,它們是:
- 地面黑霧(默認顯示)
- 太空黑霧(默認顯示)
- 伊卡洛斯護盾(默認不顯示)
- 友方建築和艦隊(默認不顯示)
- 地面雜物(默認顯示)
You can change damage text size in config file.
你可以在配置文件中自行更改傷害數字大小。
Compatibility / 兼容性
This mod is compatible with They Come From Void and its critical strike, void damage will have a unique display.
這個mod目前兼容深空來敵,並且其暴擊傷害、虛空傷害會有獨特的顯示。
Performance issues / 性能問題
- You can turn off the damage number display in the Z panel at any time, which will immediately stop any possible performance issues.
- This mod uses UI to display numbers, so when the damage number display is on, it may lower the frame rate in high-frequency damage scenarios, but it has little impact on logical frames. MOD has already limited the maximum number of damage digits that can be displayed on the same screen. Players can further reduce or increase the limit in the configuration file according to their own needs.
- 你可隨時在Z面板中關閉傷害數字顯示,這會立刻停止一切可能的性能問題。
- 此mod使用UI顯示數字,因此(當傷害數字顯示開啓時)可能在高頻率傷害的場景降低幀率,但對邏輯幀影響很小。MOD已經限制了同屏可顯示的最大傷害數字上限,玩家還可根據自身需求在配置文件中繼續降低或者提高該限制。
Installation / 安裝方法
With Mod Manager / 使用Mod管理器
Simply open the mod manager (if you don't have it install it here), select ShowDamageNumber, then Download.
Then just click Start modded, and the game will run with the mod installed.
只需要簡單的打開mod管理器(如果你還沒安裝可以點此安裝,選擇ShowDamageNumber,下載即可)。
Install manually / 手動安裝
Install BepInEx from here
Then download the mod manully and unzip into plugins.
在上述地址安裝框架和幾個前置mod,然後將本mod解壓到plugins目錄。
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: