FactoryMutiplier
工廠生產速度超頻, 並且工作電量同步加倍。OverClock your factorys to produce faster,power consumption grown up with too.
模組介紹 作者原文
工廠倍速(功耗同步增加)
- 加快工廠設施生產速度,包括:熔爐、化工廠、精煉廠、製造臺、對撞機、矩陣研究站、軌道彈射器、垂直髮射井、射線接收站等。
- 所有相關設施的工作耗電會按倍率同步增加。
- 可調整分餾塔產出重氫的概率;倍率越高功耗增長越明顯,但在較低倍率(約 50x 以下)時,單位產出通常仍優於對撞機。
配置說明
- 配置文件路徑:BepInEx\\config\\waRNing.dsp.plugins.FactoryMultiplier.cfg
- 首次運行遊戲後會自動生成配置文件。
- 修改配置後需要重啓遊戲纔會生效。
- 將倍率設爲 1 可恢復對應設施爲默認速度與功耗。
注意
- 修改後會直接作用於當前與新建的相關設施,無需重建建築或改配方。
- 請確保電力充足,否則高倍率下可能導致大面積斷電。
更新日誌
3.0
- 適配遊戲版本。
- UI 更新爲遊戲自帶樣式。
2.2.0
- 適配最新遊戲版本。
2.1.3
- 修復研究站在生產模式下使用增產劑時,額外產物未按倍率增加的問題。
2.1.2
- 由於 DSP 0.9.24.11271 已加入分餾塔功耗隨流速變化機制,移除 2.1.0 中分餾塔功耗隨堆疊數增加的邏輯。
2.1.1
- 修復 2.1.0 中未修改設施出現異常功耗的問題。
- 若你使用 2.1.0 保存過存檔,請先用 2.1.0 將所有倍率重置爲 1 並保存,再升級到 2.1.1。
2.1.0
- 重構代碼,提升對後續遊戲更新的兼容性。
- 新增設置窗口,按 LeftCtrl + R 打開,輸入倍率後可立即生效。
- 分餾塔功耗會隨輸入氫堆疊數增加:1/2/3/4 -> 1.0/1.5/2.0/2.5。
- 新增採集類倍率(採礦機、大型採礦機、抽油機、抽水站),其功耗也會同步增加。
1.3.0
- 適配 DSP 0.7.18.6931。
- 增加位面熔爐倍率修改。
1.2.4
- 修復大部分設施倍率二次修改無效的問題。
1.2.3
- 修正分餾塔功耗增長計算錯誤,30x 現爲正確效率臨界點。
1.2.2
- 新增研究站研究速度倍率。
- 提高分餾塔功耗增長幅度,高於約 30x 後單位重氫功耗會高於對撞機。
安裝
- 安裝 BepInEx。
- 將 FactoryMultiplier.dll 解壓到:steamapps/common/Dyson Sphere Program/BepInEx/plugins
Factory Multiplier (Higher Speed, Higher Power Consumption)
- Speeds up factory facilities, including Smelters, Chemical Plants, Refineries, Assemblers, Particle Colliders, Labs, Rail Ejectors, Launch Silos, and Ray Receivers.
- Power consumption for related facilities is multiplied accordingly.
- You can adjust the Deuterium output probability of Fractionators. Power usage rises quickly at high multipliers, but at lower multipliers (roughly below 50x), efficiency is generally still better than Particle Colliders.
Configuration
- Config file path: BepInEx\\config\\waRNing.dsp.plugins.FactoryMultiplier.cfg
- Run the game once to generate the config file.
- Restart the game after editing the config.
- Set multiplier to 1 to restore default behavior.
Warning
- Changes apply directly to all existing and newly built relevant facilities.
- Ensure enough power supply, or blackout may happen at high multipliers.
Update
3.0
- Adapted to the current game version.
- Updated the UI to match the game's native style.
2.2.0
- Supports the latest game version.
2.1.3
- Fixed an issue where Lab extra products were not multiplied when using Proliferator in production mode.
2.1.2
- DSP 0.9.24.11271 introduced Fractionator power scaling with fluid speed, so the stack-count-based power increase logic from 2.1.0 was removed.
2.1.1
- Fixed incorrect power consumption on unrelated facilities introduced in 2.1.0.
- If you saved with 2.1.0, reset all multipliers to 1 in 2.1.0, save your game, then upgrade to 2.1.1.
2.1.0
- Rebuilt the code for better compatibility with future updates.
- Added a UI window (LeftCtrl + R) for instant in-game multiplier updates.
- Fractionator power scales with Hydrogen stack count: 1/2/3/4 -> 1.0/1.5/2.0/2.5.
- Added mining-related speed multipliers (Mining Machine, Advanced Mining Machine, Oil Extractor, Water Pump), with corresponding power scaling.
1.3.0
- Compatibility update for DSP 0.7.18.6931.
- Added Plane Smelter multiplier support.
1.2.4
- Fixed an issue where multiplier changes became invalid after repeated edits.
1.2.3
- Corrected a Fractionator power calculation error; 30x is now the proper efficiency threshold.
1.2.2
- Added a Lab research speed multiplier.
- Increased Fractionator power growth; beyond around 30x, unit Deuterium cost becomes higher than with Particle Colliders.
Installation
- Install BepInEx.
- Unzip FactoryMultiplier.dll to steamapps/common/Dyson Sphere Program/BepInEx/plugins.
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
前置依賴
下面這些內容需要先安裝,否則該模組不會生效:
xiaoye97-BepInEx