AssemblerVerticalConstruction

版本 v1.1.13·更新於 2026-07-24

Allow Assembler Vertical Construction.

模組介紹 作者原文

AssemblerVerticalConstruction

允許製造臺、熔爐、化工廠等生產建築像研究站一樣進行垂直建造。

Allows assemblers, smelters, chemical plants, and other production buildings to be constructed vertically, similar to Matrix Labs.

Originally released by FYJ95 here.

組立機、製錬所、化學プラントなどのアセンブラがマトリックスラボのように垂直に建設できるようになります。

Changelog / 更新日誌

v1.1.13

  • 修復堆疊建築長期運行時中間層缺料。
  • Fixed middle-layer starvation during long runs.

歷史版本 / Previous versions

v1.1.12

  • 修復部分情況下堆疊生產建築無法正常傳輸物品的問題,支持自定義最大堆疊層數,並新增 Mod 兼容接口及 FE 2.3+ 自動適配。
  • Fixed stacked item-transfer issues, added configurable maximum stack counts, and introduced a compatibility API with automatic FE 2.3+ support.

v1.1.11

  • 修復多線程環境下拆除堆疊裝配器時可能發生的 ArgumentNullException 崩潰。
  • Fixed an ArgumentNullException crash that could occur when removing stacked assemblers in a multi-threaded environment.

v1.1.10

  • 修復高速或高層堆疊時,上層產物無法及時向下轉移的問題。
  • Fixed an output-transfer bottleneck affecting high-speed or tall stacks.

v1.1.9

  • 兼容 ProjectGenesis(創世之書),支持等離子熔爐垂直建造。
  • Added ProjectGenesis compatibility and vertical construction support for the Plasma Furnace.

v1.1.8

  • 修復與 SampleAndHoldSim 等 Mod 同時使用時的兼容性問題,並增強異常數據處理。
  • Fixed compatibility with mods such as SampleAndHoldSim and improved handling of abnormal assembler data.

v1.1.7

  • 修復增產劑傳遞和物品數量問題,並同步堆疊建築與藍圖的增產/加速模式。
  • Fixed proliferator transfer and item-count issues, and synchronized Productivity/Acceleration modes across stacks and blueprints.

v1.1.6

  • 適配遊戲版本 v0.10.34.28281,支持垂直建造與藍圖的增產劑同步,並修復多線程版本。
  • Added compatibility with game version v0.10.34.28281, proliferator synchronization, and multi-threading fixes.

Configuration / 配置

首次啓動後,配置文件會生成在 BepInEx/config/lltcggie.DSP.plugin.AssemblerVerticalConstruction.cfg。修改後需要重啓遊戲。

After the first launch, the configuration file is generated at BepInEx/config/lltcggie.DSP.plugin.AssemblerVerticalConstruction.cfg. Restart the game after making changes.

| 配置項 / Key | 中文說明 | English description | 默認值 / Default | 範圍 / Range |

| --------------------------------- | -------------------------- | ----------------------------------------------- | ---------------: | -----------: |

| AssemblerMaxStackCount | 製造臺最大堆疊層數 | Maximum assembler stack count | 12 | 2–32 |

| SmelterMaxStackCount | 熔爐最大堆疊層數 | Maximum smelter stack count | 14 | 2–32 |

| ChemicalPlantMaxStackCount | 化工廠最大堆疊層數 | Maximum chemical plant stack count | 9 | 2–32 |

| OilRefineryMaxStackCount | 原油精煉廠最大堆疊層數 | Maximum oil refinery stack count | 5 | 2–32 |

| ParticleColliderMaxStackCount | 微型粒子對撞機最大堆疊層數 | Maximum miniature particle collider stack count | 4 | 2–32 |

配置值表示完成最高級垂直建造科技後的允許上限,並不保證一定能達到。實際層數還受遊戲建造範圍和建築自身高度限制;例如微型粒子對撞機層高較大,配置爲 6 時,遊戲中可能仍只能建造 5 層。

The configured value is an allowed upper limit after unlocking the highest vertical construction technology level, not a guaranteed reachable height. The actual stack count is also limited by the game's construction range and the building's own height; for example, a miniature particle collider configured to 6 may still stop at 5 layers.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

xiaoye97-BepInExCommonAPI-DSPModSave

檔案與校驗

檔案名稱
AssemblerVerticalConstruction-1.1.13.zip
檔案大小
165.8 KiB