Skyrim SE FPS

Guidance for more FPS and less stuttering

Hello,

我想分享一些在Skyrim SE中获得更好体验的方法。我希望你们中的许多人能够帮助你获得更多的FPS并减少口吃的数量。

Download ENBoost for Fallout 4* from the ENB website:

ENBoost

*Also for SSE - Boris told me on his forum that it is safe to use ENBoost for F4 to SSE since both have the same engine, (my nickname is Caius Cosades), I agree with this because after over 100 hours of testing (I created a new character three weeks ago and now have level 80) I have not noticed any issues

Installation - Unzip "enbseries_fallout4_v0283" and copy the three files from the patch directory: d3d11.dll, d3dcompiler_46e.dll and enblocal.ini to the folder where SkyrimSE.exe is located

You can change enblocal.ini:

[memory]

ForceVideoMemorySize = FALSE

VideoMemorySizeMb = 4096......通过这个食谱：

Simply put:

VideoMemorySizeMb =您的系统RAM加上您的VRAM减去6 Gb，并以Mb（1 GB = 1024 Mb等）给出结果

示例：8 GB RAM + 2GB VRAM  -  6 GB = 4 Gb  - > 4096 Mb

Then VideoMemorySizeMb = 4096

PS.如果您的卡至少有6-8GB的VRAM，即使使用4k纹理也无需更改此值！ （那么你需要的只是VideoMemorySizeMb =你的VRAM（95-99％金额），例如你有6 Gb你设置6000和8 GB是8000等）

Change this parameter in SkyrimPrefs.ini*:

iVSyncPresentInterval = 1到0（[显示]部分）

and add/change:

bMouseAcceleration = 1 to 0 ([Control] section)

*File/My Games/Skyrim Special Edition

别担心，VSYNC仍然打开，因为在enblocal.ini中它是：

[engine]

ForceVSync=True

Change this parameter in Skyrim.ini:

**File/My Games/Skyrim Special Edition

uExternal Cell Buffer = 36 to 108

And add, also under the [General] section:

u intracellular buffer = 12

iPreloadSizeLimit = 1048576000

After all it should look like this:

[generally]

sLanguage = (your language)

sTestFile1 = Dawnguard.esm

sTestFile2 = HearthFires.esm

sTestFile3 = Dragonborn.esm

u intracellular buffer = 12

uexternal cell buffer = 108

iPreloadSizeLimit = 1048576000...和其他你的参数，如sIntroSequence =等

在游戏设置 - >游戏中禁用/取消选中振动和控制器

如果您的CPU具有至少6个带HT / SMT技术的内核，请在BIOS中将其关闭。您可以使用“仅”4个核心进行尝试，但是如果它为您提供FPS增加并减少口吃量，您必须自己测试。

Finish:)

############################################ ##################################

重要提示：运行SkyrimSE.exe约20-30秒后，您将看到黑屏 - 这是正常的！

############################################ ##################################

PS. Also zero CTD with my RX 560 OC 2 GB (1350/8000 MHZ) and old i3-3250 plus 8 Gb RAM (2x4 Gb DDR3 1600 MHz) for extra 5-10 FPS (even 15!) and less stutter. I hope it will be helpful to you too. If so, don't forget to upvote :)

PS2. If your card has 2 GB VRAM I highly recommend this mod:

Performance optimized textures for SSE

This texture is 1k (the original was 2k) and if you have a 1080p or lower resolution monitor you won't notice any difference in quality - just more FPS and less stuttering/faster loading!

——————————————————————————————————————————————————

Hello,

I wanted to share ways for a better experience in Skyrim SE. I hope that many of you will help you achieve more FPS and reduce the amount of stuttering.

Download ENBoost for Fallout 4* from ENB site:

ENBoost

*Also works in SSE - Boris told me on his forum was it safe to use ENBoost for F4 to SSE because both have the same engine, (my nick there is Caius Cosades) and I agree with this because after more than 100h tests (I created a new character three weeks ago who now has 80 level) I did not notice any problems

Installation - unzip "enbseries_fallout4_v0283" and copy three files from patch directory: d3d11.dll, d3dcompiler_46e.dll and enblocal.ini to the folder where SkyrimSE.exe is

You can change in enblocal.ini:

[MEMORY]

ForceVideoMemorySize=false

VideoMemorySizeMb=4096...by this recipe:

in brief:

VideoMemorySizeMb= your system RAM plus your VRAM minus 6 Gb, and give the result in Mb (1 GB = 1024 Mb etc.)

Example: 8 GB RAM + 2GB VRAM - 6 GB = 4 Gb -> 4096 Mb

then VideoMemorySizeMb=4096

PS. if your card has at least 6-8GB of VRAM you do not have to change this value even with 4k textures! (then all you need is VideoMemorySizeMb = Yours VRAM (95-99% amount) eg you have 6 Gb you set 6000 and when 8 GB is 8000 etc)

In SkyrimPrefs.ini* change this par …