Project card fix for SkyUI

by Gruffys·v1.0·Updated 2019-09-23

The alignment, size, placement, and general inconsistency of a lot of the information on the item card interface bothered me, so I spent some time moving and resizing them to make them look a little better.

Screenshots 3 screenshots

About this mod Machine translation

The alignment, size, placement, and general inconsistency of a lot of the information on the item card interface bothered me, so I spent some time moving and resizing them to make them look a little better.

The default placement of information on project cards isn't terribly bad or obvious until something like a font overhaul is installed.

It's only after you install custom fonts that you'll notice values ​​and text being pushed all over the place, mostly due to different fonts having different heights and widths.

I've tried my best to correct all inconsistencies in the default card windows and make them as unified as possible. For example, when switching between two weapons with the same properties but enchantments, you'll notice a slight change in the information. This mod fixes similar issues and moves the information to a more central location.

It's hard to notice it sometimes, but when you see it, you'll always notice it :D

This version also supports Frostfall as well as Campfire and Frostfall - unofficial SSE updates.

Since different fonts move content to different locations, no one file can do it all, so I have to make specific versions for specific fonts. In addition to the default Skyrim version, 2 custom font mods are supported:

font overhaul for mfcfbro

Mist font replacer for Sovngarde - MistValkyrie

Install

FOMOD should guide you through the entire process, selecting only one file option.

Loading order

If you are not using Frost-Hypothermia Camping Survival, this mod should be placed after SKYUI.

If you are using Frostfall - Hypothermia Camping Survival, you should place this mod after that mod or (I highly recommend) after the Campfire and Frostfall - Unofficial SSE updates.

troubleshooting

This mod replaces the itemcard.swf file in SkyUI's interface folder, so any other mod that changes this file will conflict. This mod has been tested using 1920x1080 resolution, although it will work fine at other resolutions, I cannot guarantee it.

Also you are welcome to give it a try with an unsupported font mod (I tried a few other fonts), although some things may not be completely perfect you may find that it looks better with a lot of the changes

——————————————————————————————————————————————————————

The default positioning of information on the item card isn't terribly bad or obvious until you install something like font overhaul.

Its only once you have a custom font installed that you notice that values and text gets pushed around all over the place, and this is mainly due to different fonts have very different heights and widths.

I've corrected as many of the inconsistency's in the default card window as I could find and made them as uniformed as possible. For example, when flipping between two weapons which have identical stats but one is enchanted you can notice that the information shifts slightly. This mod fixes things like that along with moving information into a more central position.

Sometimes its hardly noticeable but when you see it, you will notice it forever:D

This version also supports Frostfall and the Campfire and Frostfall - Unofficial SSE Update.

As different fonts move things into different places there is no one file fixes all and I've had to make specific versions for specific fonts. As well as the default skyrim version there are 2 custom fonts mods supported:

Font Overhaul by mfcfbro

Sovngarde - Mist's Font Replacer by MistValkyrie

Installation

The FOMOD should guide you through the process, choose only one file option.

Load Order

If you are NOT using Frostfall - Hypothermia Camping Survival this mod should be placed after SKYUI.

If you are ARE using Frostfall - Hypothermia Camping Survival this mod should be placed after it or after (which I highly recommend) the Campfire and Frostfall - Unofficial SSE Update.

Troubleshooting

This mod replaces the itemcard.swf file within SkyUI's interface folder so any other mod that changes that file will conflict. The mod has been …

Install & use Install: follow the bundled instructions

  1. Unzip the archive from playbuff and read the bundled readme / instructions first.
  2. There is no universal mod manager for this game: some mods replace game files directly, some go into a game-specific Mods folder, and some need a game-specific community loader or tool first — follow the bundled readme.
  3. Place the files exactly as the readme says; mods with listed dependencies need those installed too.
  4. Launch the game to confirm it loaded; some games require enabling mods in settings or an in-game mod menu.

Install locations vary a lot between games and mods — the bundled readme is the most reliable guide.

File & checksum

Filename
SkyUI的项目卡修复
File size
942.0 KiB