Locomotive power

by WickedHorseMan·v1.0·Updated 2025-09-22

Adjust train maximum speed and acceleration/deceleration performance based on real data

Screenshots 1 screenshots

About this mod Machine translation

Adjust train maximum speed and acceleration/deceleration performance based on real data

locomotive power

**Baltimore & Ohio Railroad No. 147** - **"Thatcher Perkins"**

**New York Central & Hudson River Railroad No. 999** (Source: trains-worldexpresses.com)

---

🚂Module introduction

Dear desperadoes!

I was not satisfied with the crazy acceleration of the train after leaving the station in the game, so I decided to make this mod. After some research, we now bring you this improved version!

✅ Advantages

  • **REAL SPEED ADJUSTMENT**: Top train speed has been adjusted to the performance of real steam locomotives - "Thatcher Perkins" Type 4-6-0 (100 mph) and NYC #999 Type 4-4-0 (86 mph)
  • **Physics Simulation Improvements**: Both acceleration and deceleration depend on the weight of the locomotive and the number of carriages behind it (the heavier → the slower the start and the longer the stop time)
  • **Full Impact**: This modification affects all NPC trains

⚠️ Notes

  • **Simplified calculation**: For the sake of simplicity, the weight of all carriages is set to 100 tons (regardless of box carriages or passenger carriages)
  • **Known Issue**: Chimney disappears at ~67mph
  • **Mission Compatibility**: Not all missions involving trains have been tested, there may be brake related issues

🔧 Installation requirements

**Required installation: LML Mod Loader**

---

Sincerely,

WickedHorseMan

Install & use Install: follow the bundled instructions

  1. Unzip the archive from playbuff and read the bundled readme / instructions first.
  2. There is no universal mod manager for this game: some mods replace game files directly, some go into a game-specific Mods folder, and some need a game-specific community loader or tool first — follow the bundled readme.
  3. Place the files exactly as the readme says; mods with listed dependencies need those installed too.
  4. Launch the game to confirm it loaded; some games require enabling mods in settings or an in-game mod menu.

Install locations vary a lot between games and mods — the bundled readme is the most reliable guide.

File & checksum

Filename
LocomotivePower
File size
19.3 KiB