Buttress SceneProp Pack

Buttress SceneProp Pack model

Buttress Pack v 0.1 by CounterPoint

These models are open source and can be used freely, but if you use them in a mod, all I ask is that you give me credit. A link back to this pack from your points list would be greatly appreciated, as well as a message showing you all the cool things you've done with it! Note that the mesh uses native textures, but can be changed to different textures.

A readme file is included with the package and contains detailed installation instructions. If there is a problem with your instructions, please let me know

Package includes

-3 brace variants, low poly lod4 and working collision

-1 flight support, collision

Install

• To install, first place all resource files in the module's 'resources'

• Open your module's module.ini file and add the following lines directly after the last 'load_resource' line

load_mod_resource = buttress_pack_counterpoint

• When you use edit mode, in order for scene props to appear, you need to add a few lines to your module_scene_props.py

Just add the following to the end

CounterPoint Buttress Pack Begin ####

（“cp_buttress_simple_a”，0，“buttress_simple_a”，“bo_buttress_simple_a”，），

（“cp_buttress_large_a”，0，“buttress_large_a “，”bo_buttress_large_a“，），

（”cp_buttress_2stp_large_a“，0，”buttress_2stp_large_a“，”bo_buttress_2stp_large_a“，），

（”cp_flying_buttress_a“，0，”flying_buttress_a“，”bo_flying_buttress_a_test“，），

CounterPoint Buttress Pack End ####

Alternatively, add these lines to the end of your scene_props.txt and increase the number at the top

by 4

spr_cp_buttress_simple_a 0 0 buttress_simple_a bo_buttress_simple_a 0

spr_cp_buttress_large_a 0 0 buttress_large_a bo_buttress_large_a 0

spr_cp_buttress_2stp_large_a 0 0 buttress_2stp_large_a bo_buttress_2stp_large_a 0

spr_cp_flying_buttress_a 0 0 flying_buttress_a bo_flying_buttress_a_test 0

CounterPoint's Buttress Pack v 0.1

These models are Open Source, and can be used freely, but if you do use them in a mod all I ask is that you give me credit. A link from your credits list back to this pack would be appreciated, as well as a message showing me all the cool things you've done with it! Notice that the meshes use native textures, but feel free to make variations based on different textures.

A readme is included in the package, with detailed installation instructions. If you have trouble with the instructions, please let me know

PACKAGE INCLUDES

-3 buttress variants, with a low poly lod4 and working collision

-1 flying buttress, with collision

INSTALLATION

-To install, first place all resource files inside your module's 'Resource' Folder

-Open your module's module.ini file and add the following line, directly after the last 'load_resource' line

load_mod_resource = buttress_pack_counterpoint

-Now to get the scene props to show up when you use edit mode, you need to add a few lines to your module_scene_props.py

Just add the following to the end

CounterPoint Buttress Pack Begin ####

("cp_buttress_simple_a",0,"buttress_simple_a","bo_buttress_simple_a", ),

("cp_buttress_large_a",0,"buttress_large_a","bo_buttress_large_a", ),

("cp_buttress_2stp_large_a",0,"buttress_2stp_large_a","bo_buttress_2stp_large_a", ),

("cp_flying_buttress_a",0,"flying_buttress_a","bo_flying_buttress_a_test", ),

CounterPoint Buttress Pack End ####

Or, add these lines to the end of your scene_props.txt, and increase the number at the top

by 4.

spr_cp_buttress_simple_a 0 0 buttress_simple_a bo_buttress_simple_a 0

spr_cp_buttress_large_a 0 0 buttress_large_a bo_buttress_large_a 0

spr_cp_buttress_2stp_large_a 0 0 buttress_2stp_large_a bo_buttress_2stp_large_a 0

spr_cp_flying_buttress_a 0 0 flying_buttress_a bo_flying_buttress_a_test 0