free controller

by maward00·v1.0·Updated 2019-08-07

free controller

Screenshots 3 screenshots

About this mod Machine translation

free controller

This will allow you to use a controller emulator such as ME-Anddermeda's X-padder.

With the exception of the D-Pad, all controller buttons are limited to COMBAT and EXPLORATION (everything else is left at its default binding).

Now you are free to imitate!

I highly recommend using Favorite Swapping Overhaul with this module. It gives you the freedom to use all features on demand through the controller without pausing.

To make it work for new games:

  • Go to [Game] + [Settings] + [Control] + [Configuration] menu
  • Select [Default] Controller Profile if not already selected
  • If prompted, exit and confirm control changes
  • Go to [Games] + [Settings] + [Control] menu 5) Set [Controller Dead Zone] to maximum 6) Use the emulator of your choice 7) Start a new game to make it work with a saved game: 1) Go to [Games] + [Settings] +

[Control] + [Configuration] menu

  • Switch to any controller profile but [Default]
  • Exit and confirm control changes
  • Return to [Configuration] menu
  • Switch to [default] controller profile
  • EXIT & CONFIRM CONTROL CHANGES
  • Go to [Game] + [Settings] + [Control] menu 8) Set [Controller Dead Zone] to maximum 9) Use the emulator of your choice and enjoy!

Install & use Install: follow the bundled instructions

  1. Unzip the archive from playbuff and read the bundled readme / instructions first.
  2. There is no universal mod manager for this game: some mods replace game files directly, some go into a game-specific Mods folder, and some need a game-specific community loader or tool first — follow the bundled readme.
  3. Place the files exactly as the readme says; mods with listed dependencies need those installed too.
  4. Launch the game to confirm it loaded; some games require enabling mods in settings or an in-game mod menu.

Install locations vary a lot between games and mods — the bundled readme is the most reliable guide.

File & checksum

Filename
自由控制器
File size
10.4 KiB
SHA-256
ff950278954ddf15d6e0b1089f6124c238f258e6be405ccd2a710a81635f3a87
Stored at
2026-10-10 18:13