SebLogiWheel
Logitech Steering Wheel and FFB support for Easy Delivery Co.
About this mod Author’s original text
SebLogiWheel
Logitech wheel support and Force Feedback (FFB) for Easy Delivery Co.
About
·
Features
·
Compatibility
·
Screenshots
·
Installation
·
Configuration
·
In-game menu
·
Troubleshooting
·
Build
About
SebLogiWheel adds Logitech wheel input + Force Feedback (FFB) support.
Wheel bindings live in SebBinds (Binds -> Wheel). Driving feature extensions (manual transmission / ignition / HUD readouts) live in SebTruck.
Important
- When SebLogiWheel is active, keyboard/controller axis driving is disabled.
- For best results, do not have other controllers plugged in at the same time as the steering wheel.
Features
- Wheel steering + pedals
- H-shifter support through SebBinds Wheel bindings (Reverse, Neutral, and Gear 1-6)
- Force Feedback (FFB)
- Calibration + axis mapping menu
- Live held-button readout in Axis Mapping/Calibration to help identify shifter positions
- Integrates with SebBinds: Wheel scheme for binds + axes
Compatibility
- Intended for modern Logitech wheels supported by Logitech G HUB / LGS.
- Tested on: G920
- Likely compatible: G29/G923 and similar Logitech wheels (not guaranteed).
Screenshots
Installation
Dependencies
- BepInEx-BepInExPack-5.4.2304
- shiibe-SebCore-1.1.0
- shiibe-SebBinds-1.1.4
Force Feedback (FFB)
- Install Logitech G HUB (or older Logitech Gaming Software) so the wheel drivers/components are present.
- LogitechSteeringWheelEnginesWrapper.dll must be alongside the plugin DLL (the build/package includes it).
Install
- r2modman:
- Manual: copy SebLogiWheel.dll to BepInEx/plugins/SebLogiWheel/
- FFB DLL: make sure LogitechSteeringWheelEnginesWrapper.dll is alongside SebLogiWheel.dll
Quick start
- Install the mod and start the game once.
- Open mods.exe (SebCore) then launch Wheel.
- Run calibration if needed.
- Open Binds -> Wheel and bind buttons/axes.
- For H-shifters, use the SebBinds Rally Gears page to bind Reverse, Neutral, and Gear 1-6 to the shifter's live button positions, then set Shift Mode to Hold on the Rally page.
Configuration
- Config file: BepInEx/config/shibe.easydeliveryco.seblogiwheel.cfg
General
- ignore_xinput_controllers (bool, default: true): Pass ignoreXInputControllers to the Logitech SDK init (recommended).
Debug
- log_detected_devices (bool, default: true): Log joystick names detected by Unity on startup.
- debug_logging (bool, default: false): Log debug information.
In-game menu
- Open mods.exe (SebCore) then launch Wheel.
- Use this menu for wheel-specific setup (calibration, axis mapping, FFB tuning).
- The Axis Mapping and Calibration screens show Buttons held, which is useful for finding each H-shifter gear position before binding it in SebBinds.
- H-shifter gear holding is configured in SebBinds via Shift Mode: Hold.
Troubleshooting
My wheel/pedals aren't working or are stuck at full throttle.
- Make sure Logitech G HUB (or older Logitech Gaming Software) is installed.
- Open mods.exe -> Wheel and check Axis Mapping.
- Run Calibration and follow the prompts.
The SDK fails to load or I get errors about missing DLLs.
- Make sure LogitechSteeringWheelEnginesWrapper.dll is in the same folder as SebLogiWheel.dll.
Build
- Build: dotnet build EasyDeliveryCoMods.sln -c Release
- Package all: powershell -NoProfile -ExecutionPolicy Bypass -File scripts/package-all.ps1 -Version 1.1.3
Install & use Install: follow the bundled instructions
- Unzip the archive from playbuff and read the bundled readme / instructions first.
- Most mods rely on the game's mod loader — the usual route is a community mod manager (such as r2modman): pick this game, install, and it handles the loader and dependencies.
- For a manual install, put the mod files into the matching Mod / plugins folder inside the game directory.
- Launch the game to confirm it loaded; mods with listed dependencies need those installed as well.
Install locations vary a lot between mods — the bundled readme is the most reliable guide.
Install these first, or the mod will not work: