SmartTank
The storage tank can accept the selected liquid infinitely, even if it is full already. The liquid overflowed will disappear. Default: Hydrogen and refined oil. By default, only unlimited hydrogen and refining are received
About this mod Machine translation
OverflowTank
The liquid tank can accept the liquid sent by the conveyor belt infinitely, even if it is full already. The liquid overflowed will disappear. Different liquids can be independently set to allow unlimited input or not. Default liquids: Hydrogen and refined oil.
If you use multi-layer tanks, you need to assure that all the layers had already trun on the input switch (that is the default condition after you built any tanks) to allow overflow.!!!Since the game version update is updated on January 20, 2022, the following additional features have not been tested!!!
If you want to prevent some of the tanks overflowing IN GAME, you need to use the multi-level storage tanks, and trun off the input switch of a selected layer except the bottom layer tank (Top layer recommended). In this case, the tank below will normally accpet the liquid but will not overflow any more. The tank above the selected layer will not accept any liquid.
Installation
- Install BepInEx.
- Drag OverflowTank.dll into "Dyson Sphere Program/BepInEx/plugins/"
ChangeLog
v1.1.3: Update for game version 0.9.24.11182. (2022-1-20)
v1.1.2: Now you can prevent the overflow in game, while control the multi-level tanks' capacity more flexibly.
v1.1.1: Bug fixed.
v1.1.0: Update for game version 0.6.17.5827.
Spillable oil storage tank
The tank can now receive unlimited fluid from the conveyor, even if it is already full. Spilled liquid will disappear. Different liquids can be independently configured to allow unlimited input. By default, only hydrogen and refined oil are received unlimitedly.
When you use a multi-layer reservoir, make sure the input switches for all layers are turned on to allow the selected liquid to overflow. !!!Due to the game version update on January 20, 2022, the additional features below have not been tested after the mod update!!!
If you want to prevent some liquid storage tanks from overflowing in the game, you need to use multi-layer liquid storage tanks, and then turn off the input switch of a certain layer of liquid storage tanks (it is recommended to turn off the top layer). In this way, the lower reservoir can still receive liquid input normally, but will no longer overflow. The closed layer and the reservoir above it will not accept input.
Install
- Install BepInEx framework.
- Place OverflowTank.dll into the "Dyson Sphere Program/BepInEx/plugins/" folder
renew
v1.1.3: Updated to adapt to game version 0.9.24.11182 (game updated on 2022-1-20)
v1.1.2: You now have more flexibility in preventing overflows in the game by configuring multi-layered reservoirs.
v1.1.1: Fixed one other issue.
v1.1.0: Adapted to game version 0.6.17.5827.
Install & use Install: BepInEx plugin
- The archive from playbuff is the mod itself — usually a BepInEx plugin (a .dll or a plugin folder once unzipped).
- Recommended: use a community mod manager (such as r2modman) — pick this game, import the mod, and the manager sets up BepInEx and its dependencies for you.
- Manual route: install the BepInEx loader in the game folder, then drop the unzipped .dll or plugin folder into BepInEx/plugins/.
- Launch the game — the BepInEx console logs every plugin it loads; seeing this mod in the log means it is installed.
Mods with listed dependencies need those installed too, or they will not load. Options are usually changed in-game or in the plugin's config file.