WoodenRamp

Wooden Ramp

Two buildable wooden ramps made for carts, plus a matching 14 degree beam.

| Piece | Size | Slope | Cost |

|---|---|---|---|

| Wood ramp 14 degrees | 2 m wide x 4 m long, 1 m rise | 14 degrees | 4 wood |

| Wood ramp 26 degrees | 2 m wide x 2 m long, 1 m rise | 26 degrees | 2 wood |

| Wood beam 14 degrees | 4 m along the ground, 1 m rise | 14 degrees | 2 wood |

• The long ramp is gentle enough to roll a fully loaded cart up without the bouncing you get on rough terrain.
• The short ramp is for tight spots where there's no room for the long one.
• The 14 degree beam has the same length and slope as the long ramp, for framing and supports underneath it.
• The ramps are built from real wood floor sections laid end to end, with the planks running across the ramp.
• All three snap at ground level on the low end and at +1 m on the high end, so they chain end to end and meet floors at beam height.
• Build them with the Hammer, under Building, near a workbench. The ramps sit right after the vanilla wood stairs, and the beam next to the vanilla wood beams.

Requirements

• BepInExPack for Valheim
• Jotunn

Mod managers like r2modman install these automatically.

Manual install

• Install BepInExPack for Valheim and Jotunn.
• Copy WoodenRamp.dll into Valheim/BepInEx/plugins.

Multiplayer

Everyone on the server needs the mod installed.

Changelog

1.2.0:

• Ramp planks now run across the ramp and the long ramp is built from two wood floor sections instead of one stretched floor.
• Ramps now sit at floor height so they line up with floors.
• Added the 14 degree beam.
• Renamed the pieces to match the vanilla names, and moved all pieces next to the vanilla wood pieces in the build menu.
• New icon to match board direction.

1.1.1

• Updated DLL

1.1.0

• Added discord channel for mod feedback
• Added the short 2x2 ramp. The original ramp is now called "Wooden ramp (long)"; ramps you've already built are unaffected.

1.0.0

• First release.