Skaft

版本 v1.3.0·更新於 2026-09-30

Hammer repair reaches further the higher your Crafting skill.

模組介紹 作者原文

Skaft

Skaft is about repair, and the Crafting skill is what it pays you in.

With the hammer it turns repair into an area repair, and the size of that area is your Crafting

skill. Every piece the sweep fixes costs the same stamina, eitr and hammer durability that

repairing it by hand would have cost, so the skill decides how far you reach and your stamina

bar decides how much of that you can afford in one swing.

At a crafting station the same skill decides how many worn items one press of the Repair button

puts right. Vanilla charges nothing to repair an item, so there is no price there to cut and the

count is the whole of it: one item a press at Crafting 0, a full kit from 60.

Skaft is Old Norse for the shaft of a tool.

Features

  • Repairing a damaged piece with the hammer also repairs the damaged pieces around it.
  • The radius comes from Crafting: nothing at level 0, about 2m at 10, 4m at 25, 7m at 50, and

8m from 60 upwards.

  • Each swept piece is charged the full vanilla per-piece repair cost. Nothing is free.
  • Pieces are repaired nearest first, so a swing that runs out of stamina has fixed the wall in

front of you.

  • The Repair entry in the build menu shows your current reach in metres and the Crafting level

it came from, and the crosshair shows how many damaged pieces are in reach of what you are

pointing at.

  • The result arrives in the usual corner message as Repaired Wood wall x13, using the game's

own text.

  • The sweep will not break your hammer inside one click; it stops a durability point short.
  • One press of the Repair button at a bench repairs several worn items: one at Crafting 0, three

around 25, seven around 50 and ten from 60.

  • The bench half grants vanilla's own skill, per item, so nine items in one press raise Crafting

by exactly what nine presses raised it by.

  • Either half can be switched off on its own.
  • No new prefabs, items, recipes or saved values. A world played with Skaft is an ordinary

world, and removing the mod leaves nothing behind.

How the sweep works

Take out the hammer, select Repair, and hit something damaged. Everything damaged within reach

of that piece is repaired until your stamina or your hammer durability runs out.

Point at something broken. With a repair entry selected, the crosshair says how many damaged

pieces are in reach of the one you are aiming at - and says aim at a damaged piece when that

one is intact, because the sweep only runs when the piece under your cursor was itself repaired

by that swing.

That line is worth having because damage is mostly invisible. The game swaps in the worn model

below three quarters health and the broken one below a quarter, and shows nothing at all above

that, so a wall at 90% looks new. The count is damage and distance only: stamina, hammer

durability, wards and a missing station can still cut the swing short, so it is what the swing

will attempt rather than a promise about what it will finish.

A second click within a second also does nothing, because vanilla holds each piece on a one

second repair cooldown. Following vanilla's own success is how the mod inherits every check the

game already makes: build mode, the crafting station a piece requires, ward access, and the

full-health test.

The radius is MinRadius + (MaxRadius - MinRadius) * (level / FullLevel)^Curve, read fresh on

every swing. With the default numbers:

| Crafting | Reach |

| --- | --- |

| 0 | none |

| 10 | 1.9m |

| 25 | 4.0m |

| 50 | 6.9m |

| 60 and above | 8.0m |

FullLevel is 60 rather than 100 because Crafting 100 costs roughly 20,300 crafts and level 60

about 5,700, and repairing buildings trains no skill at all. Crafting rises from crafting and

upgrading at a station and from repairing worn items.

Vanilla already makes building and repairing cheaper as Crafting rises: the Hammer's piece

table names the Crafting skill, so GetBuildStamina subtracts up to half the cost at max

level. Measured in game that is 5.00 stamina a piece at Crafting 0, 3.50 at 60 and 2.5

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

denikson-BepInExPack_Valheim

檔案與校驗

檔案名稱
Skaft-1.3.0.zip
檔案大小
98.2 KiB