SakeysSpawnThatconfigforDvergers

版本 v1.0.1·更新於 2026-08-02

Spawn that用のコンフィグファイル。味方勢力のドヴェルグを全バイオームでスポーンさせます。スクリーンショット、動畫リンク追加。

截圖 共 4 張

模組介紹 作者原文

Sakey's SpawnThat config for Dvergers

ドヴェルグ、好きですか?

好きですよね?

とくにソロプレイヤーにとってはミストランドまできてようやく出會う中立NPC…

たまに心配になりますよね。

彼等を連れて行きたい…

あんな苦行バイオームじゃなくて、

草原の拠點に…(´・ω・`)

よし、こうなったらドヴェルグを全部のバイオームにスポーンさせようじゃありませんか!!!!

Spawn thatで試行錯誤し、ミストランドのドヴェルグ、アッシュランドのドヴェルグ、どちらも全てのバイオームに湧かせることに成功したので、コンフィグファイルを共有したいと思います。

どちらもクロスボウを所持したドヴェルグです。

多くの方は草原にメイン拠點を作っていると思います。

勢力をプレイヤー側に設定していますので、草原にスポーンした場合は鹿やグレイリング、森が

近ければドワーフも熊もトロルもクロスボウで狩ってくれます。

雨が降った日にはネックが湧くから大忙しで狩りまくっています。

プレイヤーが鹿を見つけて打つよりも圧倒的に瞬発力が速い。

ついでにミストランドのドヴェルグは、レベルアップチャンスもあげてあるので星2もスポーンしやすいです。

拠點周辺で勝手に狩りまくってくれる

正直、このドヴェルグ全バイオーム湧きは利點しかないと日々思うほどです。

テイム系のMODよりも繁殖などが無い分軽いことが特徴でもあります。

だけどプレイヤー勢力なので、ほとんど全バイオームにドヴェルグ隊が出動してくれているような狀態になり、ゲーム內の物が多い建築勢にとっても嬉しい仕組みでの味方ドヴェルグです。

おまけですが、ミストランドに生息している野ウサギを草原でスポーンするコンフィグも書いてあります。

ミストランドよりはウサギ狩りがしやすくなる!

そうお思いでしょう?

殘念ながらすぐにドヴェルグが撃って倒すのでウサギの肉と皮があちこちに落ちていて、ウサギ自體を見ることは稀です。(笑)

【導入方法】

・まずは「SpawnThat」を導入しゲームを起動、ワールドに入り數秒間だけ起動して終了します。

・steamapp/common/Valheim/BepInEx/configに、ZIPファイル解凍したフォルダ內にあるファイル\\「spawn\_that.world\_spawners\_advanced.cfg」\\をコピーして貼り付けてください。

・同じ名前のファイルがあるという警告が出るので\\「ファイルを置き換える」\\を選択。

※シーカーの夜間スポーン止めのコンフィグを入れている方は「spawn\\\_that.world\\\_spawners\\\_advanced.cfg」を開き、重複していない部分をコピペするとOKです。

(両方まとめたコンフィグ版を出すことも可能ですがまだ検討中…)

【注意・補足】

※今後正式化などのアプデ後にもしスポーンIDが変更された場合は無効になる可能性があります。その際は更新する予定です。

※SpawnThatは各モンスターごとに割り振られたスポーンIDを指定しconfigで設定を自ら上書きする仕組みのMODですので、ファイル內容を変更すると無効になる危険があります!

私は日本語しか出來ないですし、

モッダーでもなければ、

ただの1プレイヤーに過ぎませんのであらかじめご了承ください。

ドヴェルグ好きのValheimプレイヤーのご參考になれば幸いです。

Cheers!

\---

Sakey's SpawnThat Config for Dvergrs

Do you like Dvergrs?

Of course you do.

Especially for solo players, Dvergrs are the first friendly NPCs you finally meet after reaching the Mistlands.

Sometimes you just can't help thinking...

"I wish I could bring them home..."

Not in that brutal biome...

But to a peaceful base in the Meadows... (´・ω・`)

So why not let Dvergrs spawn in every biome instead?

After a lot of experimenting with SpawnThat, I successfully made both the Mistlands Dvergrs and the Ashlands Dvergrs spawn in every biome.

I'd like to share the configuration file with everyone.

Both types carry crossbows.

Most players build their main base in the Meadows.

Since these Dvergrs are assigned to the Player faction, they will fight on your side. Around your Meadows base they'll happily hunt deer and Greylings, and if your base is close to the Black Forest they'll also take care of Greydwarfs, bears, and even Trolls with their crossbows.

When it rains and Necks appear, they stay busy hunting those too.

Their reaction speed is incredible—much faster than I can shoot a deer myself.

As a bonus, the Mistlands Dvergrs have an increased chance to level up, so you'll see two-star Dvergrs more often.

They automatically hunt enemies around your base.

Honestly, after playing with this config for a long time, I feel it has nothing but advantages.

Unlike tame-creature mods, there is no breeding or population management, making it much lighter on performance.

Because they're on the Player faction, you'll naturally end up with friendly Dvergr patrols appearing across almost every biome.

For players who enjoy building large settlements, having these friendly guards around makes the world feel much more alive.

As a small bonus, this config also makes wild rabbits spawn in the Meadows.

Hunting rabbits should be much easier than in the Mistlands...

That's what you'd expect, right?

Unfortunately, the Dvergrs usually shoot them first, so you'll often find rabbit meat and hides lying around while rarely seeing the rabbits themselves. (lol)

Installation

  • First, install SpawnThat, launch the game, enter your world, wait a few seconds, and then exit the game.
  • Open steamapp/common/Valheim/BepInEx/config.
  • Copy spawn\\\\\\\_that.world\\\\\\\_spawners\\\\\\\_advanced.cfg from the extracted ZIP folder into that directory.
  • When Windows asks if you want to replace the existing file, choose Replace the file in the destination.

If you're already using m

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

denikson-BepInExPack_ValheimASharpPen-Spawn_That

檔案與校驗

檔案名稱
SakeysSpawnThatconfigforDvergers-1.0.1.zip
檔案大小
136.0 KiB