SakeysPocketDvergr
Take your Dvergr friends with you on your adventures.You can put them back into your inventory and easily take them with you to distant places.
截圖 共 6 張
模組介紹 作者原文
Sakey's Pocket Dvergr(Poke Dve)
Take your Dvergr friends with you on your adventures.
You can put them back into your inventory and easily take them with you to distant places.
[日本語]
このMODはハルドルからドヴェルグが封印されてある人形を購入しフィールドに投げると、お友達のドヴェルグ達が出てきて、追従しながら一緒に行動してくれるものです。
ドヴェルグにはならず者、サポーター、メイジが出てくる人形をハルドルから購入すると「お友達のドヴェルグ」が出てきます。
彼等は追従してきながら一緒に戦ってくれます。
そして回収モードに切り替えて決定キーを押せば再度インベントリに人形として戻すことが可能で、追従もしますが、ポータルの向こうなど遠くに行く際は回収すると容易に遠徵先に連れていけます。
ポケットドヴェルグ、略してポケドヴェです。(笑)
しかも全員★2です。
なかなかの強さですので、通常トロルなんて目じゃありません。
でも體力がなくなると人形になって帰ってきてくれん。
そんなときはハルドルがドヴェルグの好物を売っているので作業臺に人形を持っていってみよう。
きっと帰ってきてくれる。
【仕様】
・ハルドル「ドヴェルグのならず者の人形」「ドヴェルグのサポーターの人形」「ドヴェルグのメイジの人形」をそれぞれ1000コインでを売ってくれるようになります。
・キーボードF3で「追従/待機」→「回収」と話しかけたときのモードを切り替えることができます。
・一度に何體でも召喚可能です。
・人形の狀態でアイテムスタンドに設置することも可能です。
・全てのアイテムの販売価格とモード切り替えのキー設定はコンフィグマネージャーから任意で変更することが可能です。
・ローカライズは日本語と英語のみ対応しています。
【再召喚】
・お友達がの體力がゼロになった場合、耐久値がゼロの人形になります。
・耐久値がゼロになった場合はハルドルが10コイン売っている「ドヴェルグの好物」と一緒に作業臺で修理することができます。
・その狀態でもアイテムスタンドにかざることは可能です。
【注意・その他】
・彼等は終盤バイオームの★2エネミーです。そのためハルドルから買える以上は黒い森の段階購入できますが、敵対化した場合は危険です。そのため誤爆等で敵対化した瞬間、死亡時と同じ耐久値がゼロの人形に即座に変わるようになっています。その場合も修理が必要です。
・プレイヤーキャラが死亡し、死亡場所とスポーン地點が離れていた場合、遠くにいる通常エネミーが動いていないのと同様に追従狀態でも死亡場所付近に待機狀態になります。
・F3キーでの切り替えは一応コントローラーからはL1+決定ボタンに割り當てていますが、基本的に決定ボタンの操作が優先されるため安定していません。例えば追従/待機モードから回収モードに切り替えた際にさらに切り替えようとした場合決定ボタンが優先されるためインベントリに回収してしまいます。製作者がコントローラー派であるため割り當てを一応試みていますが、F4(あるいは設定した任意のキー)で切り替えの方が安定しています。
【更新履歴】
ver1.0.0
・初期リリース。Valheim ver.1.0 対応。
[English]
This mod allows you to purchase dolls containing sealed Dvergr from Haldor. Throw one onto the field, and your Dvergr friend will come out and travel alongside you, following you wherever you go.
You can purchase the "Dvergr Doll" from Haldor to summon a "Dvergr Rogue Doll", "Dvergr Support Doll", or "Dvergr Mage Doll", each containing a different Dvergr friend.
They will follow you and fight alongside you.
You can also switch them to retrieval mode and press the confirm key to return them to your inventory as a doll. They will follow you normally, but when traveling far away, such as through a portal, it is much easier to retrieve them and take them with you to your destination.
Pocket Dvergr, or Poke Dve for short. (lol)
And they're all ★2.
They're quite powerful, so even a regular Troll is no match for them.
But when their health runs out, they return to you as a doll with zero durability.
When that happens, Haldor sells their favorite food, so take the doll to a workbench.
I'm sure they'll come back to you.
【Features】
・Haldor will sell "Dvergr Rogue Doll", "Dvergr Support Doll", and "Dvergr Mage Doll" for 1000 coins each.
・Press F3 to switch between the "Follow / Stay" and "Retrieve" modes.
・You can summon any number of them at once.
・The dolls can also be placed on item stands while in doll form.
・The selling prices of all items and the key used to switch modes can be changed freely through the Config Manager.
・Localization is available in Japanese and English only.
【Resummoning】
・When your friend reaches zero health, they return as a doll with zero durability.
・When the durability reaches zero, the doll can be repaired at a workbench using "Dvergr Favorite", which Haldor sells for 10 coins.
・The doll can still be displayed on an item stand in this state.
【Notes】
・They are ★2 enemies from late-game biomes. Since Haldor sells them, they can technically be purchased as early as the Black Forest, but they can be dangerous if they become hostile. Therefore, if they become hostile due to an accidental attack or similar, they immediately turn into a doll with zero durability, just like when they die. They will need to be repaired in that case as well.
・If the player character dies and the death location is far away from the spawn point, the Dvergr will remain near the death location even while in Follow mode, just like normal enemies in distant areas do not move.
・The F3 key is technically assigned to L1 + Confirm on controllers, but it is not very stable bec
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。
下面這些內容需要先安裝,否則該模組不會生效: