Railroads

版本 v0.1.9·更新於 2026-10-12

Stone railroads for Valheim. A coal locomotive, wagons, stations and switches. Trains keep running when nobody is near.

截圖 共 5 張

模組介紹 作者原文

Railroads

Vikings had ships. Now they have trains.

You lay stone track with the hammer, put a station on it, give the station a name and send a locomotive there. Or sit on the bench and drive it yourself, like in Factorio.

You can play it alone, host a game for friends or run it on a dedicated server. Trains keep going when nobody is near, and the server plans the routes, so 2 trains never get the same track.

What you get:

  • 24 track pieces: straights from 1 to 32 m, curves, slopes, switches, a crossing, a turning loop, a T and an X junction
  • stations with a name board
  • a locomotive that burns coal, with a speed lever and a switch lever
  • wagons with 18 slots of storage, a bench for 2 and a sign you write yourself
  • a wagon restaurant with a table that shows the food you put on it
  • a portal wagon, a portal that travels with the train
  • track, stations and trains on the map

Everything is in the Transport tab of the hammer. A train at full speed hits whatever stands on the track, so don't stand on the track.

Install it with a mod manager, or copy the folder Railroads into BepInEx/plugins. The server and every player need the same version. With another version you get a message and no rail pieces.

Settings are in BepInEx/config/vladasz.railroads.cfg. The Server section counts only on the server:

  • TopSpeed, 4 to 15 m/s, default 10
  • CoalPer100Meters, 0 to 5, default 1. With 0 trains need no coal
  • MaxCoal, 20 to 500, default 100
  • MaxWagons, 0 to 8, default 4
  • Hits: Everything, MobsOnly or Nothing
  • SureKill: a train at 9.5 m/s kills any mob it hits, a boss too
  • PortalWagon: on or off
  • MapTrack, MapStations, MapTrains: what players may see on the map

If something does not work, tell me on Discord:

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

denikson-BepInExPack_Valheim

檔案與校驗

檔案名稱
Railroads-0.1.9.zip
檔案大小
1.4 MiB