HalfBeam

版本 v0.1.1·更新於 2026-10-10

Half-sized beams so you can build with more precision.

截圖 共 1 張

模組介紹 作者原文

HalfBeam

Half-sized beams so you can build with more precision.

This mod adds shorter variants of the wood, ashwood and darkwood beams and poles, 17 new pieces in total.

Pieces

| Wood type | Beams and poles | Diagonal beams |

| --- | --- | --- |

| Wood | 0.5m | 26°, 45° and 67° |

| Ashwood | 0.5m | 26°, 45° and 67° |

| Darkwood | 1m and 0.5m | 26°, 45° and 67° |

Diagonals are half the vanilla length, so they span 1m across and 0.5m, 1m or 2m up.

Each piece costs half its original materials, rounded up to a minimum of 1.

Example

The below screenshot shows the different beam variants added by the HalfBeam mod.

Notes

  • Everyone on a server needs the mod installed.
  • Removing the mod removes its pieces from your world.
  • The darkwood beams have their decorative trim stretched. This is a known visual quirk for now.
  • Snow caps are not shown on the new poles and diagonal beams.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

ValheimModding-Jotunndenikson-BepInExPack_Valheim

檔案與校驗

檔案名稱
HalfBeam-0.1.1.zip
檔案大小
50.9 KiB