FlyWithHammer
Automatically enables flight while the building Hammer is equipped, with adjustable fly speed, optional floating, Feather Fall, and an F6 toggle.
模組介紹 作者原文
Fly With Hammer
Fly With Hammer makes building easier by automatically enabling Valheim's fly mode while the building Hammer is equipped.
Features
- Automatically enables flight while the Hammer is equipped.
- Adjustable fly-speed slider.
- Optional completely stationary floating after deselecting the Hammer.
- Adjustable floating duration from 0 to 60 seconds.
- Feather Fall after the floating period/deselecting.
- Master enable/disable option.
- Configurable toggle key.
- Default toggle key is F6.
- Floating is disabled by default.
Configuration
The config file is generated at:
BepInEx/config/Moopfam.FlyWithHammer.cfg
[General]
Enabled = true
ToggleKey = F6
FlySpeed = 0.1
FloatingEnabled = false
FloatingSeconds = 5
Fly Speed
FlySpeed controls the flight speed multiplier:
- 0.0 = no movement
- 0.1 = 10% speed
- 0.5 = 50% speed
- 1.0 = normal Valheim debug-fly speed
Floating
When enabled, deselecting the Hammer holds the player completely still in the air for the configured number of seconds before Feather Fall begins.
FloatingSeconds supports values from 0 to 60.
Installation
Vortex Mod Manager / r2modman
Install Fly With Hammer through the mod manager. BepInEx will be installed automatically as a dependency.
Manual Installation
- Install BepInExPack for Valheim.
- Place FlyWithHammer.dll inside:
Valheim/BepInEx/plugins/
- Start Valheim.
Requirements
- Valheim
- BepInExPack for Valheim
Version
1.1.1
Fixed manifest.json
Changelog
1.1.0
- Initial release
1.1.1
- Fixed manifest.json
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時，主機與所有用戶端需要安裝一致的模組。
下面這些內容需要先安裝，否則該模組不會生效：