DynamicStoragePiles IngotExpansion

版本 v1.0.9·更新於 2026-09-26

Dynamic Storage Piles 0.8.1 with the seven IngotStacks integrated directly, including current Flametal visuals and custom pile behaviour.

模組介紹 作者原文

DynamicStoragePiles_IngotExpansion

This package is a community-maintained integrated build based on Dynamic Storage Piles 0.8.1 by MSchmoecker, with the seven IngotStacks piles built directly into the plugin.

Included

  • Copper Stack
  • Tin Stack
  • Bronze Stack
  • Iron Stack
  • Silver Stack
  • Blackmetal Stack
  • Flametal Stack

The integrated ingot piles use a modified recipe cost of 30 ingots per stack in this build. This differs from the original IngotStacks implementation.

The Flametal pile uses the current Valheim Flametal appearance while retaining Dynamic Storage Piles' dynamic visual behaviour and container functionality.

Attribution

This mod is based on Dynamic Storage Piles by MSchmoecker.

Original project:

  • GitHub:

-:

-:

The original Dynamic Storage Piles project included integration with IngotStacks by MySoloTeam. This package incorporates the ingot stack functionality directly into the Dynamic Storage Piles build rather than requiring IngotStacks as a separate dependency.

Original IngotStacks project:

-:

This package is a community-maintained integrated build and is not the original Dynamic Storage Piles release.

Requirements

  • BepInExPack Valheim 5.4.2351
  • Jötunn 2.30.2

Installation

Install the package through r2modman, or extract it into your Valheim BepInEx profile.

Do not install the original Dynamic Storage Piles plugin alongside this package.

Do not install the old standalone IngotStacks plugin. IngotStacks is already integrated.

Your separate Steelhammer Essentials Dynamic Storage Piles compatibility patch can remain installed.

Notes

This package provides an integrated community-maintained build based on Dynamic Storage Piles 0.8.1. The plugin retains the original Dynamic Storage Piles assembly identity so existing configuration and compatibility behaviour remain associated with Dynamic Storage Piles.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時,主機與所有用戶端需要安裝一致的模組。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

denikson-BepInExPack_ValheimValheimModding-Jotunn

檔案與校驗

檔案名稱
DynamicStoragePiles_IngotExpansion-1.0.9.zip
檔案大小
1023.9 KiB