Coal Control
A small mod to adjust how much coal the smelter gives per wood type used.
模組介紹 作者原文
Coal Control
Make Deforestation a Thing of the Past!
This is a simple mod that will allow you to change how much coal is given out by any smelter returning coal as an output (non-vanilla ones will work too!)
Why use this mod?
Well, if...
- You're not a fan of deforesting an entire area to smelt your ores
- You wish different types of wood gave different amounts of coal
- You want to streamline the smelting process a bit, without changing other drop rates... then this mod might just be for you!
What can be changed?
Any smelter or kiln type workstation that gives coal as an output can now be changed to give more than one.
You can specify different types of wood to give different amounts of coal all in an easy configuration file.
Configuration
By default:
- Wood gives 2 coal per piece
- Fine wood gives 1 coal per piece
- Core wood gives 3 coal per piece
To change the values, locate your config file maxfoxgaming.coalcontrol.cfg in your Bepinex config folder, and you will see an option that looks like this:
Wood:2,Finewood:1,RoundLog:3
Each entry in the config has the format {Type of Wood}:{Amount of Coal Returned} separated by commas for each. The wood type must match the prefab name, NOT the localized name. To find prefab names, you can look in the Valheim Wiki.
Can I add other wood types to the smelter with this mod?
You cannot tell the smelter which types of wood can be accepted. However, if you are using a mod like WackysDatabase and have added more wood types to the kiln, you can add them to this config file.
- Example: Let's assume we added Ancient Bark to the possible list of smelter inputs using WackysDatabase. We can do add ElderBark:2 to the end of the config file to have:2,Finewood:1,RoundLog:3,ElderBark:2. This will now allow Ancient Bark to return 2 coal when used in a kiln.
Contact Me (Bug Reports & Suggestions)
If you have any suggestions, or experience bugs / problems using this mod please get in touch with me on my Discord.
Installation (Manual Download)
Move the 'plugins' folder from the archive to your BepInEx folder.
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。 多人連線時，主機與所有用戶端需要安裝一致的模組。
下面這些內容需要先安裝，否則該模組不會生效：