CaptainsLog

Captain's Log

Logs ship telemetry — speed, wind, sail efficiency, rudder, heading — to CSV while you sail, plus a live HUD. Built to gather empirical data on ship speed instead of relying on guessed/community-reported stats.

Features

• Logs a CSV row every time the local player is aboard a moving ship (sample rate configurable, default 2/sec)
• Captures: timestamp, player, ship name, position, biome, forward speed (m/s and knots), throttle setting, propulsion mode (oars forward/reverse vs sail), rudder, heading, relative wind angle, sail wind-efficiency factor, wind intensity, absolute wind direction
• Small HUD, visible only while aboard a ship: speed in knots (or m/s), wind strength and where it comes from, sail efficiency while the sail is up, and the rudder while it's turned
• The HUD sits under your hotbar, including a second row added by AzuExtendedPlayerInventory, or beside the ship's rudder icon like Azumatt's Ship Stats
• One CSV file per game session, written to BepInEx/CaptainsLog/shiplog-.csv
• A Player column on every row, so logs from different people can be merged
• Optional server install: a dedicated server logs every player's sailing into one file

Server logging

Install the mod on a dedicated server and it writes BepInEx/CaptainsLog/shiplog-server-.csv for as long as the server runs. It logs every ship that has someone at the helm or its sail or oars engaged, at the configured sample interval per ship.

• Player is the helmsman. If nobody is steering (a sail left up), it's the player whose game is running the ship.
• Speed is exact, not estimated. The sailing player's game runs the ship's physics and sends its velocity to the server, and the server logs that velocity.
• Players don't need the mod for their sailing to be logged. The server log has no HUD, and the [HUD] settings are ignored there.
• A busy server writes about 2 rows a second per ship being sailed, roughly 0.7 MB an hour each.

Why these columns

Raw speed alone doesn't tell you much — a ship that's "fast" running downwind might be mediocre upwind. Logging wind angle and sail efficiency (GetWindAngleFactor, the game's own point-of-sail multiplier) alongside speed lets you separate "this ship is fast" from "this ship happened to have good wind" when comparing runs.

Rudder is where the rudder sits, from -1 (full left) to 1 (full right), which is what actually steers the ship.

Valheim wind has no speed, only a strength from 0 to 1 (WindIntensity), which scales sail force from 25% to 100%. Sail force doesn't depend on how fast the ship is already going, so a ship can easily outpace any "wind speed" you might derive from it, and the HUD shows wind as a percentage for that reason. (Azumatt's Ship Stats converts it to knots by treating full strength as 10 m/s, which is only a convention.)

On the HUD, from... is where the wind comes from relative to the hull, not a compass direction: astern, a quarter (within 67.5° of astern), the beam, the bow, or ahead, on the port or starboard side. The efficient figure on the Sail line is WindAngleFactor (below), which depends only on that angle.

WindAngleDeg is signed and ranges -180° to +180°: 0° = tailwind (wind at your stern, pushing you forward), +/-180° = headwind (wind on the nose). WindAngleFactor (0-1) is the game's own sail-efficiency curve for that angle (Ship.GetWindAngleFactor): 0.7 with the wind dead astern, rising to 1.0 with the wind exactly on the beam (+/-90°), falling back to about 0.78 at +/-139°, then cut to 0 by +/-143°. Within about 37° of dead ahead the sail gives no push at all.

SpeedSetting (Stop/Back/Slow/Half/Full) is the ship's five-step throttle. Propulsion translates that into what's actually moving the ship: Idle, Oars-Reverse (Back), Oars-Forward (Slow), or Sail-Half/Sail-Full (Half/Full). Note that the game's own Ship.IsSailUp() isn't an independent sail-raised sensor — it's literally defined as SpeedSetting == Half || SpeedSetting == Full — so we don't log it separately; Pr