ImpactHammerRework

版本 v1.0.0·更新於 2026-03-04

Based on Broccolite's rework idea, and ideas mentioned in their videos.

模組介紹 作者原文

Impact Hammer Rework

It turns out EnragedOne beat me to this by about 45 minutes. Also check out their version.

Based on Broccolite's rework idea, and ideas mentioned in their videos. Alongside their rework idea, the following changes have been implemented:

  • Firing a Shotgun will reduce the Impact Hammers' shared heat
  • Creating a shockwave/explosion with the Pump Charge Impact Hammer increases the shared heat based on how many pumps were used (maximum of 3)
  • Pump Charge Impact Hammer's first pump's damage is reduced from 3.5 to 1.5 (these values in the config are multiplied by 10, as that's the scale the game uses for explosion damage)
  • As heat increases, the pitch of the hammer's hit sound increases. For clarity, the variation in pitch is also reduced

Scores will not be saved while using this mod, as it modifies gameplay mechanics.

Most changes can be disabled by setting their respective setting to 0, but two changes are a bit more complicated:

  • To disable the rising pitch, set "Current Heat Pitch Multiplier" to 0, "Max Pitch" to 3, and "Pitch Variation" to 0.2
  • To disable the Pump Charge first pump damage nerf, change "First Pump Damage" to 35

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

EternalsTeam-PluginConfiguratorBepInEx-BepInExPack

檔案與校驗

檔案名稱
ImpactHammerRework-1.0.0.zip
檔案大小
22.8 KiB